PM5362TUPP-PLUS
DATA SHEET
PMC-951010
ISSUE 6
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR
Register 11H:Tributary Remote Defect Indication Control
Bit
Type
Function
Default
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
LOMRDI
LOPRDI
AISRDI
0
0
0
0
0
0
0
0
UNEQRDI
PSLMRDI
PSLURDI
TIMRDI
TIURDI
This register controls the insertion of tributary path RDI on the receive alarm port
(RAD) and optionally on the V5 byte (G1 in TU3 mode) as a result of tributary
pointer alarms, tributary path signal label alarms, tributary trace identifier alarms
and tributary multiframe alarms.
TIURDI:
The TIURDI bit is an active high RDI insertion enable. When TIURDI is set
high, RDI is reported on RAD and optionally in the V5 byte (G1 byte in TU3
mode) of the outgoing data stream for all tributaries that are in trace identifier
unstable state. When TIURDI is set low, reporting of RDI due to TIU is
inhibited.
TIMRDI:
The TIMRDI bit is an active high RDI insertion enable. When TIMRDI is set
high, RDI is reported on RAD and optionally in the V5 byte (G1 byte in TU3
mode) of the outgoing data stream for all tributaries that are in trace identifier
mismatch state. When TIURDI is set low, reporting of RDI due to TIM is
inhibited.
PSLURDI:
The PSLURDI bit is an active high RDI insertion enable. When PSLURDI is
set high, RDI is reported on RAD and optionally in the V5 byte (G1 byte in
TU3 mode) of the outgoing data stream for all tributaries that are in path
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
102