PM5362TUPP-PLUS
DATA SHEET
PMC-951010
ISSUE 6
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR
signal label unstable state. When PSLURDI is set low, reporting of RDI due
to PSLU is inhibited.
PSLMRDI:
The PSLMRDI bit is an active high RDI insertion enable. When PSLMRDI is
set high, RDI is reported on RAD and optionally in the V5 byte (G1 byte in
TU3 mode) of the outgoing data stream for all tributaries that are in path
signal label mismatch state. When PSLMRDI is set low, reporting of RDI due
to PSLM is inhibited.
UNEQRDI:
The UNEQRDI bit is an active high RDI insertion enable. When UNEQRDI is
set high, RDI is reported on RAD and optionally in the V5 byte (G1 byte in
TU3 mode) of the outgoing data stream for all tributaries that are in
unequipped state. When UNEQRDI is set low, reporting of RDI due to UNEQ
is inhibited.
AISRDI:
The AISRDI bit is an active high RDI insertion enable. When AISRDI is set
high, RDI is reported on RAD and optionally the V5 byte (G1 byte in TU3
mode) of the outgoing data stream for all tributaries that are in incoming AIS
state. When AISRDI is set low, reporting of RDI due to AIS is inhibited.
LOPRDI:
The LOPRDI bit is an active high RDI insertion enable. When LOPRDI is set
high, RDI is reported on RAD and optionally the V5 byte (G1 byte in TU3
mode) of the outgoing data stream for all tributaries that are in loss of pointer
state. When LOPRDI is set low, reporting of RDI due to LOP is inhibited.
LOMRDI:
The LOMRDI bit is an active high RDI insertion enable. When LOMRDI is set
high, RDI is reported on RAD and optionally in the V5 byte (G1 byte in TU3
mode) of the outgoing data stream for all tributaries that are in loss of
multiframe state. When LOMRDI is set low, reporting of RDI due to LOM is
inhibited.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
103