PM5362TUPP-PLUS
DATA SHEET
PMC-951010
ISSUE 6
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR
Register 08H:Tributary Payload Processor Interrupt and LOM Status
Bit
Type
Function
Default
ZBit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Unused
Unused
LOM3V
LOM2V
LOM1V
VTPP3I
VTPP2I
VTPP1I
X
X
0
0
0
0
0
0
R
R
R
R
R
R
This register provides interrupt status of the three H4 byte framers and of the
three tributary payload processors in the TUPP-PLUS.
VTPP1I:
VTPP1I identifies tributary payload processor #1 as the source of a pending
interrupt. It is necessary to read the various interrupt status registers in
tributary payload processor #1 to determine the event causing the interrupt
and to clear the interrupt. Interrupts disabled at tributary payload processor
#1 will not be reported by the VTPP1I bit.
VTPP2I:
VTPP2I identifies tributary payload processor #2 as the source of a pending
interrupt. It is necessary to read the various interrupt status registers in
tributary payload processor #2 to determine the event causing the interrupt
and to clear the interrupt. Interrupts disabled at tributary payload processor
#2 will not be reported by the VTPP2I bit.
VTPP3I:
VTPP1I identifies tributary payload processor #3 as the source of a pending
interrupt. It is necessary to read the various interrupt status registers in
tributary payload processor #3 to determine the event causing the interrupt
and to clear the interrupt. Interrupts disabled at tributary payload processor
#3 will not be reported by the VTPP3I bit.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
86