Head-separated Digital Pressure Sensor
DP5
SERIES
DPH
SERIES
728
FIBER
SENSORS
LASER
SENSORS
SPECIFICATIONS
Sensor head
Type
Item
Type of pressure
Rated pressure range (Note 2)
Pressure withstandability
Applicable fluid
Supply voltage
Current consumption
0 to –101.3 kPa
500 kPa
+10
Vacuum pressure
–101 kPa type
Positive pressure
1 MPa type
Gauge pressure
0 to 1.000 MPa
1.500 MPa
Non-corrosive gas
12 to 24 V DC
–15
% Ripple P-P 10 % or less
Compound pressure
±100 kPa type
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
Model No.
DPH-A00 DPH-A10 DPH-A20 DPH-A30 DPH-A02 DPH-A12 DPH-A22 DPH-A07 DPH-A17 DPH-A27
–100.0 to 100.0 kPa
500 kPa
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
15 mA or less (operation indicator lights off) / 17 mA or less (operation indicator lights on)
Output voltage: 1 to 5 V (over rated pressure range)
Zero point: within 1 V ±2 % F.S. (vacuum / positive pressure type)
within 3 V ±3 % F.S. (compound pressure type)
Span: within 4 V ±3.5 % F.S.
Linearity: within ±1 % F.S.
Output impedance: 1 kΩ approx.
5
Output voltage (V)
3
1
Pressure
Analog voltage output
(
High pressure
positive / compound
pressure type
High vacuum
(vacuum pressure type)
)
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Pollution degree
Environmental resistance
Protection
Ambient temperature
Ambient humidity
EMC
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Operation indicator
Temperature characteristics
Voltage characteristics
Pressure port
Material
Connecting method
Cable
Cable extension
Net weight
Accessories
3 (Industrial environment)
IP40 (IEC)
0 to +50 °C
+32 to +122 °F
(No dew condensation), Storage: –10 to +60 °C
+14 to +140 °F
35 to 85 % RH, Storage: 35 to 85 % RH
EN 61000-6-2, EN61000-6-4
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm
0.118 in
amplitude, in X, Y and Z directions for two hours each
1,000 m/s
2
acceleration (100 G approx.) in X, Y and Z directions for three times each
Orange LED [lights up when the Comparative Output 1 is ON (only in case of connection to the
DP5
series pressure controller)]
Over ambient temperature range +10 to +40 °C
+50 to +104 °F:
within ±1 % F.S. of detected pressure at +25 °C
+77 °F
Over ambient temperature range 0 to +50 °C
+32 to +122 °F:
within ±3 % F.S. of detected pressure at +25 °C
+77 °F
Within ±0.5 % F.S. for ±10 % fluctuation of the supply voltage
DPH-A0□:
M5 male thread (for installing gasket),
DPH-A1□:
R 1/8 male thread / M5 female thread
DPH-A2□:
NPT 1/8 male thread / 10-32UNF female thread,
DPH-A30:
10-32UNF male thread (for installing gasket)
Enclosure: PBT, Pressure port: Brass (nickel plated) [however, stainless steel (SUS303) in case of
DPH-A0□]
Connector
0.2 mm
2
4-core oil resistant cabtyre cable with connector, 100 mm
3.937 in
long
Extension up to total 10 m
32.808 ft
is possible with 0.3 mm
2
, or more, cable.
DPH-A0□
/
DPH-A30:
6 g approx.,
DPH-A1□
/
DPH-A2□:
10 g approx.
Gasket (DPH-A0□,
DPH-A30
only)
Selection
Guide
Pressure/
Digital Display
Pressure/
Head-separated
Flow
Other
Products
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C
+68 °F.
2) The rated pressure range indicates the range for full product performance.
3) The sensor head can be used independently.
DPC-L100/
DPH-L100
DPS-400/
DPH-100
DPC-100/
DPH-100
DP5/
DPH
PANASONICBATTERY [ Panasonic Battery Group ]
