Head-separated Digital Pressure Sensor
DP5
SERIES
DPH
SERIES
724
FIBER
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
BASIC PERFORMANCE
OPTIONS
Globally usable
Two types of output, NPN and PNP, are available to allow
use of the sensors anywhere in the world. The sensor, of
course, conforms to the CE marking EMC Directive.
Further, it has obtained UL Recognition.
2 types of sensor mounting brackets are available
Using the vertical mounting bracket (MS-DP-3) and the
horizontal mounting bracket (MS-DP-4), the devices can
be installed in the space inside machines or boxes.
MS-DP-3 for vertical orientation mounting
Installed oriented upwards
MS-DP-4 for horizontal orientation mounting
Installed oriented to the left
Conforming to
EMC Directive
Recognition
MOUNTING / SIZE
Easy mounting, mobile pressure port
The head’s pressure port can
be rotated independently (free-
turning) of the sensor head. In
addition to being easy to mount,
the cable can be laid in any
direction.
Installed oriented downwards
Installed oriented to the right
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN MACHINE
INTERFACES
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
FA COMPONENTS
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
DIN rail mounting bracket is available
The controller can be mounted even on a 35 mm
1.378 in
width DIN rail by using the optional DIN rail
mounting bracket (MS-DP-2). It can be fitted even in a
narrow space inside your equipment because it can be
mounted from four directions.
Light-weight, compact design
The controller was designed to be light-weight and
compact.
Control panel setup is low cost and requires minimal
space.
Supplied with a panel mounting bracket
A panel mounting bracket
(MS-DP-1) is enclosed to
enable simple mounting of
the controller onto the panel
surface, thus contributing to
the total cost reduction.
Since the panel thickness
can be from 1 to 6 mm
0.039 to 0.236 in,
the
controller can even be
mounted on thick, resin-
made panels.
The attached panel
mounting bracket enables
vertical installation.
Made for horizontal panel mounting
Using the horizontal multiple panel
mounting bracket, the
MS-DP-5
(optional), direct panel surface
horizontal mounting is rendered
possible. For installation, the
panel thickness must be from 1 to
6 mm
0.039 to 0.236 in.
MS-DP-5
Selection
Guide
Pressure/
Digital Display
Pressure/
Head-separated
Flow
FUNCTIONS
Other Products
User friendly two-color digital display
The user friendly two-color digital display changes color
when output changes (ON / OFF), making it easy to
check operation status at a glance. The display color
can be linked to Comparative Output 1 or Comparative
Output 2.
Two operation indicators
There are two operation
indicators that light
respectively when
Comparative Output 1
or Comparative Output
2 is ON. They are
convenient for intensive
operation checks.
DPC-L100/
DPH-L100
DPS-400/
DPH-100
DPC-100/
DPH-100
DP5/DPH
Two independent outputs plus analog voltage output
In addition to two independent outputs (ON / OFF),
analog voltage output (1 to 5 V) is also available. The
different outputs allow you to create solutions for a wide
variety of applications.
Lights up in conjunction with
comparative output 1
Lights up in conjunction with
comparative output 2
Sensor head auto-recognition
The head’s auto-recognition function means you don’t
have to manually set the head type at the controller,
saving you valuable time.
PANASONICBATTERY [ Panasonic Battery Group ]
