Multilayer Ceramic Capacitors(For General Usage)
Specification
Item
Test Method
Bending value:1 mm
Class 1
Appearance:
Class 2
Appearance:
Bending
Strength
No mechanical damage
Capacitance change:
Within 5 % or 0.5 pF
whichever is larger.
No mechanical damage
Capacitance change:
Temp. Char.
Bending speed:1 mm/
20
B, X7R, X5R : within 12.5 %
R340
F ,Y5V
: within 30 %
45 2
45 2
Unit : mm
Total amplitude : 1.5 mm
Vibration frequency : 10 to 55 to 10 Hz
for 1 min.
3 perpendicular directions for 2 hours
each, a total of 6 hours
Vibration
Proof
Appearance: No mechanical damage.
Capacitance: within the specified tolerance
Q, tan : Initial standard value
δ
Resistance
to Soldering
Heat
Appearance:
Appearance:
Soldering bath method
No mechanical damage
Capacitance change:
Within 2.5 % or 0.25 pF
whichever is larger.
No mechanical damage
Capacitance change:
Temp. Char.
Preconditioning:Heat treatment/Class 2(✽1)
Solder temperature:270 5 °C
Dipping period:3.0 0.5 s
B, X7R, X5R : within 7.5 % Preheat condition:
Q.tan :Initial standard value
F, Y5V
: within 20 %
δ
Order Temp. (°C) Size 0805 max.
IR:Initial standard value
Withstand voltage:
tan :Initial standard value
δ
IR:Initial standard value
Withstand voltage:
1
2
80 to 100
150 to 200 120 to 180 s
120 to 180 s
No dielectric breakdown
and/or damage
No dielectric breakdown
and/or damage
Recovery (Standard condition):
Class 1:24 2 h
Class 2:48 4 h
Solderability More than 95 % of the soldered area of both terminal
electrodes should be covered with fresh solder.
Soldering bath method
Solder temperature:230 5 °C
Dipping period:4 1 s
Solder:H63A (JIS Z 3282)
Temperature Appearance:
Appearance:
Preconditioning:Heat treatment
(150 °C, 1h) /Class 2
Cycle
No mechanical damage
No mechanical damage
Capacitance change:
Temp. Char.
Capacitance change:
Within 2.5 % or 0.25 pF
whichever is larger.
Condition of one cycle
Step1:Minimum operationing temp.
B, X7R, X5R: within 7.5 %
30 3 min
3 min max.
Step3:Maximum operationing temp.
Q.tan :Initial standard value
F, Y5V
: within 20 %
Step2:Room temp.
δ
IR:Initial standard value
Withstand voltage:
tan :Initial standard value
δ
IR:Initial standard value
Withstand voltage:
30 3 min
3 min max.
No dielectric breakdown
and/or damage
Step4:Room temp.
Number of cycles:5 cycles
No dielectric breakdown
and/or damage
Recovery (Standard condition)
Class 1:24 2 h
Class 2:48 4 h
Preconditioning:Heat treatment/Class 2(✽1)
Temperature:40 2 °C
Damp Heat
(Steady state)
Appearance:
Appearance:
No mechanical damage
Capacitance change:
Within 5 % or 0.5 pF
whichever is larger.
Q:
No mechanical damage
Capacitance change:
Temp. Char.
Relative humidity:90 to 95 %
Test period:500+24/0 h
B, X7R, X5R: Within 20 % Recovery (Standard condition)
F, Y5V: Within 30 %
tan :
δ
Temp. Char.
B, X7R, X5R: 0.25 max.
F, Y5V: 0.3 max.
Class 1:24 2 h
Class 2:48 4 h
C<10 pF:Q 200+10C
>
10 pF C<30 pF:Q 275
+
>
5C/2
<
>
30 pF C 1000 pF:Q 350
<
<
tan
:
δ
C>1000 pF:tan
0.004
IR:
δ<
C:Nominal capacitance in pF
1000 M or 50/C (M )
ȑ
ȑ
IR:
Whichever is less.
Note:10/C (M ) min. for DC 10 V max.
1000 M or 50/C (M )
ȑ
ȑ
ȑ
Whichever is less.
C:Nominal capacitance in µF
C:Nominal capacitance in µF
Please see the technical
specifications for details.
(✽1) Heat treatment: 1 h of heat treatment at 150 +0/-10 °C followed by 48 4 h recovery under standard conditions.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Sep. 2008
– EC11 –
PANASONIC [ PANASONIC ]
