欢迎访问ic37.com |
会员登录 免费注册
发布采购

19293-004-DIE 参数 Datasheet PDF下载

19293-004-DIE图片预览
型号: 19293-004-DIE
PDF下载: 下载PDF文件 查看货源
内容描述: [Telecom Circuit, 1-Func, DIE]
分类和应用: 电信电信集成电路
文件页数/大小: 26 页 / 1039 K
品牌: ONSEMI [ ON SEMICONDUCTOR ]
 浏览型号19293-004-DIE的Datasheet PDF文件第2页浏览型号19293-004-DIE的Datasheet PDF文件第3页浏览型号19293-004-DIE的Datasheet PDF文件第4页浏览型号19293-004-DIE的Datasheet PDF文件第5页浏览型号19293-004-DIE的Datasheet PDF文件第6页浏览型号19293-004-DIE的Datasheet PDF文件第7页浏览型号19293-004-DIE的Datasheet PDF文件第8页浏览型号19293-004-DIE的Datasheet PDF文件第9页  
AMIS-52150
Low-Power Transceiver with Clock and Data Recovery
Data Sheet
1.0 Introduction
The AMIS-52150 is a low-cost, ultra-low power single chip transceiver. It combines the proven amplitude shift key/on-off key
(ASK/OOK) modulation technology of the AMIS-52000 with data clock recovery. The AMIS-52150 is targeted at narrow band
applications in the 402 to 405MHz range.
Features such as dual independent receive channels, quick start crystal oscillator start up, Sniff Mode™ signal acquisition, and data
clock recovery make the AMIS-52150 ideally suited for a wide range of customer applications. Applications that the AMIS-52150 can be
used for are point-to-point wireless data links, low cost wireless monitors, very low power remote wireless sensors, and many other
uses.
2.0 Key Features
Data clock recovery
Auto slicing of data
Very low-power single-chip transceiver
Minimal external components
Low-power RC oscillator
Quick Start for the crystal oscillator
Extreme low-power RF Sniff Mode™, wakes on RSSI
Internal trim functions reduce external component requirements
I
2
C control interface
Serial TX/RX data port
Clock generation for an external microprocessor
Wake up on RSSI
Antenna diversity dual receiver
Internal VCO/PLL tuning varactor
Application wakeup interrupt to external controller
3.0 Technical Features
Operating Frequency:
o
Quick Start range 350 to 448MHz
o
Non-Quick Start range 300 to 768MHz
o
Targeted range 402 to 405MHz
TX Output Power: +12dBm
RX Sensitivity:
o
Sniff Mode: -93dBm minimum
o
Receive: -117dBm minimum @ 1Kbps with CDR
Data Rate:
o
1 to 8Kbps with Manchester Coding
o
1 to 16Kbps with NRZ data
Power Requirements:
o
Receive: 7.5mA (continuous)
o
Transmit: 25mA full power; 50 percent duty cycle
o
Sniff Mode: 75uA (one percent duty cycle)
o
Standby: 500nA (RC oscillator running)
Operating Voltage: 2.3 to 3.6V
Modulation: ASK/OOK
Xtal Start Time: 15us (Quick Start)
Sniff Mode Polling: 0.5ms to 16s (0.5ms or 64ms steps)
AMI Semiconductor
– Rev 4.0, Oct. 06 – M-20535-004
www.amis.com
1