欢迎访问ic37.com |
会员登录 免费注册
发布采购

ML53612 参数 Datasheet PDF下载

ML53612图片预览
型号: ML53612
PDF下载: 下载PDF文件 查看货源
内容描述: 64通道全双工H.100 / H.110 CT总线系统接口和时间槽交换 [64-Channel Full Duplex H.100/H.110 CT Bus System Interface and Time-Slot Interchange]
分类和应用: 数字传输控制器电信集成电路电信电路
文件页数/大小: 68 页 / 643 K
品牌: OKI [ OKI ELECTRONIC COMPONETS ]
 浏览型号ML53612的Datasheet PDF文件第46页浏览型号ML53612的Datasheet PDF文件第47页浏览型号ML53612的Datasheet PDF文件第48页浏览型号ML53612的Datasheet PDF文件第49页浏览型号ML53612的Datasheet PDF文件第51页浏览型号ML53612的Datasheet PDF文件第52页浏览型号ML53612的Datasheet PDF文件第53页浏览型号ML53612的Datasheet PDF文件第54页  
ML53612 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––  
5.10 Indirect Transmit Switch Parallel Access Registers, AR = 403fh:4000h (Ch. 63:0)  
DR_0  
Definition  
[7:0]  
TDM Data [1:8]  
TDM Data [1:8] (Read/Write)  
Writing to this register provides the transmit data when the transmit switch channel is configured to use parallel microprocessor data as its source (to  
CT_D). This register and the serial input buffer share common hardware, therefore this register must be written after the transmit switch channel  
source is changed from serial TDM data to parallel microprocessor data.  
The transmit switch channel output buffer data obtained by reading the TDM data register. When the transmit switch channel is configured to use serial  
TDM data as its source, the data from the local SI channel can be monitored. When the transmit switch channel is configured to use parallel  
microprocessor data as its source, the data written into this register can be monitored.  
Note: When converted from parallel to serial, TDM Data Bit 1 is transmitted first.  
5.11 Indirect Receive Switch Parallel Access Registers, AR = 503fh:5000h (Ch. 63:0)  
DR_0  
Definition  
[7:0]  
TDM Data [1:8]  
TDM Data [1:8] (Read/Write)  
Writing to this register provides the receive data when the receive switch channel is configured to use parallel microprocessor data as its source (to  
L_SO). This register and the serial input buffer share common hardware, so this register must be written after the receive switch channel source is  
changed from serial TDM data to parallel microprocessor data.  
The receive switch channel output buffer data is obtained by reading the TDM Data register. When the receive switch channel is configured to use serial  
TDM data as its source, the data from the CT_D stream and time-slot selected in the receive switch routing registers can be monitored. When the  
receive switch channel is configured to use parallel microprocessor data as its source, the data written into this register can be monitored.  
Note: When converted from parallel to serial, TDM Data Bit 1 is transmitted first.  
46  
Oki Semiconductor  
 复制成功!