Philips Semiconductors
LPC2364/2366/2368
Fast communication chip
Table 3.
Symbol
Pin description
…continued
Pin
Type
location
6
I/O
I
O
I
Description
P0.26 —
General purpose digital input/output pin.
AD0.3 —
ADC 0, input 3.
AOUT —
DAC output.
RXD3 —
Receiver input for UART3.
P0.27 —
General purpose digital input/output pin.
SDA0 —
I
2
C0 data input/output. Open drain output (for I
2
C compliance).
P0.28 —
General purpose digital input/output pin.
SCL0 —
I
2
C0 clock input/output. Open drain output (for I
2
C compliance).
P0.29 —
General purpose digital input/output pin.
U1D+ —
USB1 bidirectional D+ line.
P0.30 —
General purpose digital input/output pin.
U1D− —
USB1 bidirectional D− line.
Port 1:
Port 1 is a 32 bit I/O port with individual direction controls for each bit. The
operation of port 1 pins depends upon the pin function selected via the Pin Connect
block. Pins 2, 3, 5, 6, 7, 11, 12, and 13 of this port are not available.
P1.0 —
General purpose digital input/output pin.
ENET_TXD0 —
Ethernet transmit data 0.
P1.1 —
General purpose digital input/output pin.
ENET_TXD1 —
Ethernet transmit data 1.
P1.4 —
General purpose digital input/output pin.
ENET_TX_EN —
Ethernet transmit data enable.
P1.8 —
General purpose digital input/output pin.
ENET_CRS —
Ethernet carrier sense.
P1.9 —
General purpose digital input/output pin.
ENET_RXD0 —
Ethernet receive data.
P1.10 —
General purpose digital input/output pin.
ENET_RXD1 —
Ethernet receive data.
P1.14 —
General purpose digital input/output pin.
ENET_RX_ER —
Ethernet receive error.
P1.15 —
General purpose digital input/output pin.
ENET_REF_CLK —
Ethernet receiver clock.
P1.16 —
General purpose digital input/output pin.
ENET_MDC —
Ethernet MIIM clock.
P1.17 —
General purpose digital input/output pin.
ENET_MDIO —
Ethernet MI data input and output.
P1.18 —
General purpose digital input/output pin.
U1UP_LED —
USB1 GoodLink LED indicator. It is LOW when device is configured
(non-control endpoints enabled). It is HIGH when the device is not configured or during
global suspend.
PWM1.1 —
Pulse Width Modulator 1, channel 1 output.
CAP1.0 —
Capture input for Timer 1, channel 0.
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
P0.26/AD0.3/
AOUT/RXD3
P0.27/SDA0
P0.28/SCL0
P0.29/U1D+
P0.30/U1D−
P1.0 to P1.31
25
24
29
30
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
P1.0/
ENET_TXD0
P1.1/
ENET_TXD1
P1.4/
ENET_TX_EN
P1.8/
ENET_CRS
P1.9/
ENET_RXD0
P1.10/
ENET_RXD1
P1.14/
ENET_RX_ER
95
94
93
92
91
90
89
I/O
O
I/O
O
I/O
O
I/O
I
I/O
I
I/O
I
I/O
I
I/O
I
I/O
I
I/O
I/O
I/O
O
P1.15/
88
ENET_REF_CL
K
P1.16/
ENET_MDC
P1.17/
ENET_MDIO
P1.18/
U1UP_LED/
PWM1.1/
CAP1.0
87
86
32
O
I
LPC2364_66_68_1
Preliminary data sheet
Rev. 01 — 22 September 2006
8 of 48
PHILIPS [ NXP SEMICONDUCTORS ]
