■ Specifications and Test Methods
No Item
24 Temperature
Specification
Test Method（Ref. Standard:AEC-Q200）
No bias
Nominal values of the temperature coefficientis is
shown in Rated value. But, the Capacitance Change
under Reference Temperature is shown inTable A.
Capacitance Drift: Within +/-0.2% or +/-0.05pF
(Whichever is larger.)
The capacitance change should be measured after 5 min at each specified temp. stage.
Capacitance value as a reference is the value in "*" marked step.
Characteristics of
Capacitance
Capacitance Drift
The capacitance drift is calculated by dividing the differences between the maximum and minimum
measured values in the step 1,3 and 5 by the cap. value in step 3.
Less than 1.0Vrms (Refer to the individual data sheet)
Measurement Voltage
Temperature Step
GCM2165C2A122GA16-01A
5
MURATA [ muRata ]
