■ Specifications and Test Methods
No Item
Specification
Test Method（Ref. Standard:AEC-Q200）
-
-
1 Pre-and Post-Stress
Electrical Test
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-2.5%
Q≧1000
Mounting method
Test Temperature
Test Time
Solder the capacitor on the test substrate
150+/-3℃
1000+/-12h
2 High Temperature
Exposure (Storage)
I.R.(Room Temp.)
More than 10000MΩ
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-2.5%
Q≧1000
Mounting method
Cycles
Temperature Cycling
Solder the capacitor on the test substrate
1000cycles
3 Temperature Cycling
I.R.(Room Temp.)
More than 10000MΩ
Post-treatment
Per EIA-469
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
No defects or abnormalities.
4 Destructive Physical
Analysis
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-3%
Q≧350
Mounting method
Test Temperature
Test Humidity
Solder the capacitor on the test substrate
+25℃ to +65℃
80%RH to 98%RH
5 Moisture Resistance
I.R.(Room Temp.)
More than 10000MΩ
Test Time
Apply the 24h treatment shown below, 10 consecutive times.
Temperature and Humidity cycle
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
GCM2165C2A122GA16-01A
2
MURATA [ muRata ]
