■ Specifications and Test Methods
No Item
6 Biased Humidity
Specification
Test Method(Ref. Standard:AEC-Q200)
Solder the capacitor on the test substrate
85+/-3℃
80%RH to 85%RH
Appearance
No defects or abnormalities.
Within +/-3%
Mounting method
Test Temperature
Test Humidity
Test Time
Capacitance Change
Q or D.F.
I.R.(Room Temp.)
Q≧200
More than 1000MΩ
1000+/-12h
Test Voltage
The rated voltage and 1.3+0.2/-0Vdc (add 6.8kΩ resister)
Charge/discharge current 50mA max.
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-3%
Q≧350
Mounting method
Test Temperature
Test Time
Solder the capacitor on the test substrate
Maximum Operating Temperature +/-3℃
1000+/-12h
7 Operational Life
I.R.(Room Temp.)
More than 1000MΩ
Test Voltage
200% of the rated voltage
Charge/discharge current 50mA max.
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
No defects or abnormalities.
Shown in Dimension.
Visual inspection
8 Appearance
Using Measuring instrument of dimension.
Per MIL-STD-202 Method 215
9 Dimension
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
10 Resistance to Solvents
Within the specified initial value.
Within the specified initial value.
More than 10000MΩ
I.R.(Room Temp.)
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
Within the specified initial value.
Within the specified initial value.
More than 10000MΩ
Mounting method
Waveform
Peak value
Solder the capacitor on the test substrate
Half-sine
1500g
0.5ms
11 Mechanical Shock
I.R.(Room Temp.)
Holding Time
Velocity change
Shocks directions and times
4.7m/s
Three shocks in each direction should be applied along 3
mutually perpendicular axes of the test specimen (18 shocks).
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
Within the specified initial value.
Within the specified initial value.
More than 10000MΩ
Mounting method
Kind of Vibration
Vibration Time
Solder the capacitor on the test substrate
A 10Hz to 2000Hz to 10Hz
20min
1.5mm
12 Vibration
I.R.(Room Temp.)
Total amplitude
Vibration directions and time
This motion should be applied for 12 items in each 3 mutually perpendicular directions
(total of 36 times).
Appearance
Capacitance or Capacitance Change
No defects or abnormalities.
Test Method
Solder bath method
Sn-3.0Ag-0.5Cu(Lead Free Solder)
260+/-5℃
10+/-1s
13 Resistance to Soldering
Heat
Capacitance:Within the specified initial value.
Within the specified initial value.
More than 10000MΩ
Kind of Solder
Test Temperature
Test Time
Q or D.F.
I.R.(Room Temp.)
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
Within the specified initial value.
Within the specified initial value.
More than 10000MΩ
Per AEC-Q200-002
14 ESD
I.R.(Room Temp.)
GCM2165C2A122GA16-01A
3