MP2007 – 3A, 1.3V-6.0V INPUT, DDR MEMORY TERMINATION REGUALTOR
ORDERING INFORMATION
Part Number*
Package
Top Marking
Temperature
MP2007DH
MSOP8E
2007D
–40°C to +85°C
* For Tape & Reel, add suffix –Z (e.g. MP2007DH–Z); For RoHS Compliant Packaging, add suffix –LF (e.g.
MP2007DH–LF–Z)
PACKAGE REFERENCE
TOP VIEW
DDQ
VTT
1
2
3
4
8
7
6
5
VTTREF
EN
GND
REF
VTTSEN
VDRV
Thermal Resistance (4)
θJA θJC
ABSOLUTE MAXIMUM RATINGS (1)
Supply Voltage VDDQ......................... -0.3V to
6.0V
MSOP8E.................................. 80...... 12... oC/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ(MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-
TA)/ θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
Drive Voltage VDRV..................... -0.3V to 6.0V
All Other Pins................................ -0.3V to 6.0V
Continuous Power Dissipation
........................................................... 1.56W
Junction Temperature...............................150oC
Lead Temperature ....................................260oC
Storage Temperature .............. -50oC to +150oC
(TA = +25°C)(2)
3) The device is not guaranteed to function outside of its operating
conditions.
4) Measured on JESD51-7 4-layer board.
Recommended Operating Conditions (3)
Drive Voltage VDRV....................... 4.5V to 5.5V
Operating Temperature .............–40oC to +85oC
MP2007 Rev. 0.9
7/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
2
MPS [ MONOLITHIC POWER SYSTEMS ]
