Mitsubishi microcomputers
M16C / 62 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Functions To Inhibit Rewriting (Flash Memory Version)
ID Code Check Function
Use this function in standard serial I/O mode. When the contents of the flash memory are not blank, the ID
code sent from the peripheral unit is compared with the ID code written in the flash memory to see if they
match. If the ID codes do not match, the commands sent from the peripheral unit are not accepted. The ID
code consists of 8-bit data, the areas of which, beginning with the first byte, are 0FFFDF16, 0FFFE316,
0FFFEB16, 0FFFEF16, 0FFFF316, 0FFFF716, and 0FFFFB16. Write a program which has had the ID code
preset at these addresses to the flash memory.
Address
ID1 Undefined instruction vector
ID2 Overflow vector
0FFFDC16 to 0FFFDF16
0FFFE016 to 0FFFE316
0FFFE416 to 0FFFE716
0FFFE816 to 0FFFEB16
0FFFEC16 to 0FFFEF16
0FFFF016 to 0FFFF316
0FFFF416 to 0FFFF716
0FFFF816 to 0FFFFB16
0FFFFC16 to 0FFFFF16
BRK instruction vector
ID3 Address match vector
ID4 Single step vector
ID5 Watchdog timer vector
ID6 DBC vector
ID7 NMI vector
Reset vector
4 bytes
Figure 1.29.10. ID code store addresses
250
MITSUBISHI [ Mitsubishi Group ]
