MT90220
Address (Hex):
Direct access
Reset Value (Hex):
116
1 register for the 8 RX links
00
Bit #
Type
Description
7
6
5
4
3
2
1
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Write a 0 to clear the OIF counter for physical link 7.
Write a 0 to clear the OIF counter for physical link 6.
Write a 0 to clear the OIF counter for physical link 5.
Write a 0 to clear the OIF counter for physical link 4.
Write a 0 to clear the OIF counter for physical link 3.
Write a 0 to clear the OIF counter for physical link 2.
Write a 0 to clear the OIF counter for physical link 1.
Write a 0 to clear the OIF counter for physical link 0.
Table 47 - RX OIF Counter Clear Command Register
Address (Hex):
Direct access
117
1 register to select the link from which to extract the RX ICP cells values shown
in following registers
00
Reset Value (Hex):
Bit #
Type
Description
7:4
3
R
R
Unused. read all 0’s.
Reserved.
2:0
R/W
Selects the RX physical link number to update the values from the RX ICP cell. This is
used when the RX Link is enabled but in UNI mode to collect the values received over the
ICP cells.
Table 48 - RX Load Values/Link Select Register
Address (Hex):
Direct access
118
The value is updated on completion of the write action in the RX Load Values
register
00
Reset Value (Hex):
Bit #
Type
Description
7:0
R
This register stores the value of the IMA ID extracted from the valid RX ICP cell received
on the link selected in the RX Load Values/Link Select register.
Table 49 - RX Link IMA ID Registers
54
MITEL [ MITEL NETWORKS CORPORATION ]
