PIC16F84-04/P 参数 Datasheet PDF下载

PIC16F8X

3.1

Clocking Scheme/Instruction Cycle

3.2

Instruction Flow/Pipelining

The clock input (from OSC1) is internally divided by

four to generate four non-overlapping quadrature

clocks namely Q1, Q2, Q3 and Q4. Internally, the

program counter (PC) is incremented every Q1, the

instruction is fetched from the program memory and

latched into the instruction register in Q4. The

instruction is decoded and executed during the

following Q1 through Q4. The clocks and instruction

execution flow is shown in Figure 3-2.

An “Instruction Cycle” consists of four Q cycles (Q1,

Q2, Q3 and Q4). The instruction fetch and execute are

pipelined such that fetch takes one instruction cycle

while decode and execute takes another instruction

cycle. However, due to the pipelining, each instruction

effectively executes in one cycle. If an instruction

causes the program counter to change (e.g.,

GOTO)

then two cycles are required to complete the instruction

(Example 3-1).

A fetch cycle begins with the Program Counter (PC)

incrementing in Q1.

In the execution cycle, the fetched instruction is latched

into the “Instruction Register” in cycle Q1. This

instruction is then decoded and executed during the

Q2, Q3, and Q4 cycles. Data memory is read during Q2

(operand read) and written during Q4 (destination

write).

FIGURE 3-2:

CLOCK/INSTRUCTION CYCLE

Q1

Q2

Q3

Q4

Q1

Q2

Q3

Q4

Q1

Q2

Q3

Q4

OSC1

Q1

Q2

Q3

Q4

PC

OSC2/CLKOUT

(RC mode)

PC

PC+1

PC+2

Internal

phase

clock

Fetch INST (PC)

Execute INST (PC-1)

Fetch INST (PC+1)

Execute INST (PC)

Fetch INST (PC+2)

Execute INST (PC+1)

EXAMPLE 3-1:

1. MOVLW 55h

2. MOVWF PORTB

3. CALL SUB_1

4. BSF

INSTRUCTION PIPELINE FLOW

Fetch 1

Execute 1

Fetch 2

Execute 2

Fetch 3

Execute 3

Fetch 4

Flush

Fetch SUB_1 Execute SUB_1

PORTA, BIT3

All instructions are single cycle, except for any program branches. These take two cycles since the fetch

instruction is “flushed” from the pipeline while the new instruction is being fetched and then executed.

DS30430C-page 10

©

1998 Microchip Technology Inc.