欢迎访问ic37.com |
会员登录 免费注册
发布采购

PIC16C74B-04/P 参数 Datasheet PDF下载

PIC16C74B-04/P图片预览
型号: PIC16C74B-04/P
PDF下载: 下载PDF文件 查看货源
内容描述: 40分之28引脚8位CMOS微控制器 [28/40-Pin 8-Bit CMOS Microcontrollers]
分类和应用: 微控制器和处理器外围集成电路光电二极管可编程只读存储器时钟
文件页数/大小: 184 页 / 2122 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号PIC16C74B-04/P的Datasheet PDF文件第17页浏览型号PIC16C74B-04/P的Datasheet PDF文件第18页浏览型号PIC16C74B-04/P的Datasheet PDF文件第19页浏览型号PIC16C74B-04/P的Datasheet PDF文件第20页浏览型号PIC16C74B-04/P的Datasheet PDF文件第22页浏览型号PIC16C74B-04/P的Datasheet PDF文件第23页浏览型号PIC16C74B-04/P的Datasheet PDF文件第24页浏览型号PIC16C74B-04/P的Datasheet PDF文件第25页  
PIC16C63A/65B/73B/74B  
4.2.2.3  
INTCON Register  
Note: Interrupt flag bits are set when an interrupt  
condition occurs, regardless of the state of  
its corresponding enable bit, or the global  
enable bit, GIE (INTCON<7>). User soft-  
ware should ensure the appropriate inter-  
rupt flag bits are clear prior to enabling an  
interrupt.  
The INTCON register is a readable and writable regis-  
ter, which contains various enable and flag bits for the  
TMR0 register overflow, RB Port change and external  
RB0/INT pin interrupts.  
REGISTER 4-3:  
INTCON REGISTER (ADDRESS 0Bh, 8Bh)  
R/W-0  
GIE  
R/W-0  
PEIE  
R/W-0  
T0IE  
R/W-0  
INTE  
R/W-0  
RBIE  
R/W-0  
T0IF  
R/W-0  
INTF  
R/W-x  
RBIF  
bit 7  
bit 0  
bit 7  
bit 6  
bit 5  
bit 4  
bit 3  
bit 2  
bit 1  
bit 0  
GIE: Global Interrupt Enable bit  
1= Enables all unmasked interrupts  
0= Disables all interrupts  
PEIE: Peripheral Interrupt Enable bit  
1= Enables all unmasked peripheral interrupts  
0= Disables all peripheral interrupts  
T0IE: TMR0 Overflow Interrupt Enable bit  
1= Enables the TMR0 interrupt  
0= Disables the TMR0 interrupt  
INTE: RB0/INT External Interrupt Enable bit  
1= Enables the RB0/INT external interrupt  
0= Disables the RB0/INT external interrupt  
RBIE: RB Port Change Interrupt Enable bit  
1= Enables the RB port change interrupt  
0= Disables the RB port change interrupt  
T0IF: TMR0 Overflow Interrupt Flag bit  
1= TMR0 register has overflowed (must be cleared in software)  
0= TMR0 register did not overflow  
INTF: RB0/INT External Interrupt Flag bit  
1= The RB0/INT external interrupt occurred (must be cleared in software)  
0= The RB0/INT external interrupt did not occur  
RBIF: RB Port Change Interrupt Flag bit  
1= At least one of the RB7:RB4 pins changed state(1)  
0= None of the RB7:RB4 pins have changed state  
Note 1: A mismatch condition will exist until PORTB is read. After reading PORTB, the RBIF  
flag bit can be cleared.  
Legend:  
R = Readable bit  
-n = Value at POR  
W = Writable bit  
U = Unimplemented bit, read as 0’  
0= Bit is cleared x = Bit is unknown  
1= Bit is set  
2000 Microchip Technology Inc.  
DS30605C-page 21  
 复制成功!