PIC12CE67X
2.3
Quick-Turn-Programming (QTP)
Devices
2.0
PIC12CE67X DEVICE
VARIETIES
A variety of frequency ranges and packaging options
are available. Depending on application and production
requirements, the proper device option can be selected
using the information in the PIC12CE67X Product Iden-
tification System section at the end of this data sheet.
When placing orders, please use that page of the data
sheet to specify the correct part number.
Microchip offers a QTP Programming Service for fac-
tory production orders. This service is made available
for users who choose not to program a medium to high
quantity of units and whose code patterns have stabi-
lized. The devices are identical to the OTP devices but
with all EPROM locations and configuration options
already programmed by the factory. Certain code and
prototype verification procedures apply before produc-
tion shipments are available. Please contact your local
Microchip Technology sales office for more details.
For example, the PIC12CE67X device “type” is indi-
cated in the device number:
1. CE, as in PIC12CE674. These devices have
OTP program memory, EEPROM data memory
and operate over the standard voltage range.
2.4
Serialized Quick-Turn Programming
(SQTPSM) Devices
2.1
UV Erasable Devices
Microchip offers a unique programming service where
a few user-defined locations in each device are pro-
grammed with different serial numbers.The serial num-
bers may be random, pseudo-random, or sequential.
The UV erasable version, offered in windowed pack-
age, is optimal for prototype development and pilot pro-
grams.
Serial programming allows each device to have a
unique number which can serve as an entry-code,
password, or ID number.
The UV erasable version can be erased and repro-
grammed to any of the configuration modes.
Microchip's PICSTART Plus and PRO MATE pro-
grammers both support the PIC12CE67X. Third party
programmers also are available; refer to the Microchip
Third Party Guide for a list of sources.
Note: Please note that erasing the device will
also erase the pre-programmed internal
calibration value for the internal oscillator.
The calibration value must be saved prior
to erasing the part.
2.2
One-Time-Programmable (OTP)
Devices
The availability of OTP devices is especially useful for
customers who need the flexibility for frequent code
updates and small volume applications.
The OTP devices, packaged in plastic packages, per-
mit the user to program them once. In addition to the
program memory, the configuration bits must also be
programmed.
1998 Microchip Technology Inc.
Preliminary
DS40181B-page 5
MICROCHIP [ MICROCHIP ]
