MX25L3205A
Macronix NBitTM Memory Family
32M-BIT [x 1] CMOS SERIAL eLiteFlashTM MEMORY
FEATURES
GENERAL
- Automatically erases and verifies data at selected
• Serial Peripheral Interface (SPI) compatible -- Mode 0
and Mode 3
sector
- Automatically programs and verifies data at selected
page by an internal algorithm that automatically times
the program pulse widths (Any page to be programed
should have page in the erased state first)
• Status Register Feature
• 33,554,432 x 1 bit structure
• 64 Equal Sectors with 64K byte each
- Any sector can be erased
• Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is from 1.5V to 2.5V
• Electronic Identification
- JEDEC 2-byte Device ID
- RES command, 1-byte Device ID
- REMS command, ADD=00H will output the
manufacturer's ID first and ADD=01H will output device
ID first
PERFORMANCE
• High Performance
- Fast access time: 50MHz serial clock (30pF + 1TTL
Load)
• Additional 4Kb sector independent from main memory
for parameter storage to eliminate EEPROM from
system
- Fast program time: 3ms/page (typical, 256-byte per
page)
- Fast erase time: 1s/sector (typical, 64K-byte per
sector) and 64s/chip (typical)
HARDWAREFEATURES
• SCLK Input
- Acceleration mode:
- Serial clock input
• SI Input
- Program time: 2.4ms/page (typical)
- Erase time: 0.8s/sector (typical) and 51s/chip
(typical)
- Serial Data Input
• SO/PO7
- Serial Data Output or Parallel mode Data output/input
• WP#/ACC Pin
• Low Power Consumption
- Low active read current: 30mA (max.) at 50MHz
- Low active programming current: 30mA (max.)
- Low active erase current: 38mA (max.)
- Low standby current: 50uA (max.)
-Deeppower-downmode1uA(typical)
- Hardware write protection and Program/erase accel-
eration
• HOLD# pin
- pause the chip without disselecting the chip (not for
parallel mode, please connect HOLD# pin to VCC dur-
ing parallel mode)
• Minimum 10K erase/program cycle for array
• Minimum 100K erase/program cycle for additional 4Kb
• PO0~PO6
SOFTWAREFEATURES
- for parallel mode data output/input
• PACKAGE
• Input Data Format
- 1-byte Command code
- 16-pin SOP (300mil)
• Auto Erase and Auto Program Algorithm
- 8-land SON (8x6mm)
- All Pb-free devices are RoHS Compliant
P/N:PM1243
REV. 1.2, NOV. 06, 2006
1
Macronix [ MACRONIX INTERNATIONAL ]
