欢迎访问ic37.com |
会员登录 免费注册
发布采购

MAX11128 参数 Datasheet PDF下载

MAX11128图片预览
型号: MAX11128
PDF下载: 下载PDF文件 查看货源
内容描述: 1MSPS ,低功耗,串行12位/ 10位/ 8位,4 / 8 / 16通道ADC [1Msps, Low-Power, Serial 12-/10-/8-Bit, 4-/8-/16-Channel ADCs]
分类和应用:
文件页数/大小: 40 页 / 3202 K
品牌: MAXIM [ MAXIM INTEGRATED PRODUCTS ]
 浏览型号MAX11128的Datasheet PDF文件第21页浏览型号MAX11128的Datasheet PDF文件第22页浏览型号MAX11128的Datasheet PDF文件第23页浏览型号MAX11128的Datasheet PDF文件第24页浏览型号MAX11128的Datasheet PDF文件第26页浏览型号MAX11128的Datasheet PDF文件第27页浏览型号MAX11128的Datasheet PDF文件第28页浏览型号MAX11128的Datasheet PDF文件第29页  
MAX11120–MAX11128  
1Msps, Low-Power, Serial 12-/10-/8-Bit,  
4-/8-/16-Channel ADCs  
Table 2. ADC Mode Control Register (continued)  
DEFAULT  
STATE  
BIT NAME  
BIT  
FUNCTION  
Power Management Modes (Table 5). In external clock mode, PM[1:0] selects  
between normal mode and various power-down modes of operation.  
PM[1:0]  
4:3  
00  
External Clock Mode. Channel address is always present in internal clock mode.  
Set to 1, DOUT is a 16-bit data word containing a 4-bit channel address, followed by  
a 12-bit conversion result led by the MSB.  
CHAN_ID  
2
0
Set to 1 to initiate conversions with the rising edge of CS instead of cycling CNVST  
(internal clock mode only).  
This bit is used for the internal clock mode only and must be reasserted in the ADC  
mode control, if another conversion is desired.  
SWCNV  
1
0
0
0
Unused  
Table 3. ADC Scan Control  
SCAN3 SCAN2 SCAN1 SCAN0  
MODE NAME  
FUNCTION  
Continue to operate in the previously selected mode. Ignore data  
on bits [10:0]. This feature is provided so that DIN can be held low  
when no changes are required in the ADC Mode Control register.  
Bits [6:3, 1] can be still written without changing the scan mode  
properties.  
0
0
0
0
0
0
0
1
N/A  
The next channel to be selected is identified in each SPI frame. The  
conversion results are sent out in the next frame.  
Clock mode: External clock only  
Manual  
Channel scan/sequence: Single channel per frame  
Channel selection: See Table 4, CHSEL[3:0]  
Averaging: No  
Scans channel N repeatedly. The FIFO stores 4, 8, 12, or 16  
conversion results for channel N.  
Clock mode: Internal clock only  
0
0
0
0
1
1
0
1
Repeat  
Channel scan/sequence: Single channel per frame  
Channel selection: See Table 4, CHSEL[3:0]  
Averaging: Yes  
Scans channels 0 through N. The FIFO stores N conversion results.  
Clock mode: Internal clock  
Standard_Int  
Channel scan/sequence: N channels in ascending order  
Channel selection: See Table 4, CHSEL[3:0] determines channel N  
Averaging: Yes  
���������������������������������������������������������������� Maxim Integrated Products 25  
 复制成功!