NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Application Tooling (Continued)
The unique system pro-
Features
Crimp Quality Monitor
(CQM)
Crimp Force Monitor
(CFM)
vides 100% on-the-fly crimp
inspection. It measures the
crimp height of each termina-
tion, and evaluates the quality
of each crimp. If a crimp is
questionable, the monitor
alerts the operator with both
visual and audible alarms. It
also provides ports for print-
ing and networking. When
used with AMP-O-LECTRIC
Model “G” Termination Ma-
chines, the monitor is mount-
ed to the machine. When
used with AMPOMATOR CLS
IV Lead Making Machines, it is
integrated into the machine’s
operating system.
•ꢀ 1ꢀorꢀ2ꢀChannels
•ꢀ 128ꢀxꢀ128ꢀDotꢀMatrix
Part No. 1320420-2
•ꢀ Zoneꢀ&ꢀPeakꢀForceꢀ
Analysis
•ꢀ ForceꢀTrigger
•ꢀ EncoderꢀProximityꢀTrigger
•ꢀ AbsoluteꢀForceꢀ
Measurement
•ꢀ Monitorsꢀtheꢀwireꢀbarrelꢀ
crimp of open-barrel,
uninsulated contacts and
terminals
•ꢀ Real-timeꢀmonitoringꢀofꢀ
every crimp
Your Quality Program
calls for more than a
•ꢀ Specialꢀapplicatorsꢀareꢀnotꢀ
required
Good Crimping System. It
demands proof — the proof
you get with the SLE crimp
force monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification of
typical crimping faults.
For more information, request
Catalog 82275.
•ꢀ UseꢀwithꢀtheꢀAMP-3K/40ꢀ
and AMP-5K/40 presses
from Tyco Electronics
The AMP 3K/40 and AMP
5K/40 Terminators are
designed for customers
that require the increased
output and quality of a
semiautomatic machine
at a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of optional
equipment, these terminators
offer flexibility to meet the
specific needs of various
applications at the lowest
possible cost.
AMP 3K/40 and AMP
5K/40 Terminating
Machines
•ꢀ Frame-mountedꢀforceꢀ
sensor
•ꢀ Forꢀbenchꢀorꢀfully-
automatic machines
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice.
•ꢀ Pleaseꢀcontactꢀusꢀforꢀanyꢀ
other type of press you
would like to use with the
CFM
Crimp Force Monitor
Specifications
It’s known worldwide, and
meets our standards or a
high performance terminating
system. That’s how you can
be sure.
•ꢀ Electrical:ꢀ110-230ꢀVACꢀ
Single Phase, 50-60 Hz, 15
watts
•ꢀ Sizeꢀ(Monitor):ꢀ178mmꢀxꢀ
137mm x 95mm
Features
•ꢀ 3,000 lb [1361 kg] max.
crimp force (AMP 3K/40);
•ꢀ Weightꢀ(Monitor):ꢀ1.02kgꢀ
(single channel), 1.05kg
(double channel)
High quality crimping — with
verification — means higher
production and productivity.
•ꢀ 5,000 lb [2268 kg] max.
crimp force (AMP 5K/40)
For more information, request
Catalog 1309085-2
•ꢀ Toolless removal of
applicators and guards
•ꢀ Jog capability
The System III Applicator
introduces several new tech-
nologies into the applicator
including a precision servo-
electric motorized feed-
System III Applicator
•ꢀ Quiet, fast operation -
80/76 dBA and cycle time
less than 0.400 seconds
•ꢀ Accepts Heavy Duty Mini
ing system, a built-in data
module for storing terminal
crimp and set-up information,
a precision fit round ram, and
a newly designed terminal
depressor. It still utilizes the
proven quality of the HD-M
crimper and anvil tooling.
stye applicators
•ꢀ Wide range of optional
equipment such as toolless
precision crimp height
adjust, batch counter, CQM
capability and work light
For more information, request
Catalog 1654956-2.
For more information, request
Catalog 1654956-8
Note: New Stripping Module
available, see page 79.
92
Catalog 82003
Revised 06-08
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets are
Dimensions are shown for USA: 1-800-522-6752
reference purposes only. Canada: 1-905-470-4425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Specifications subject
Mexico: 01-800-733-8926
www.tycoelectronics.com equivalent U.S. Customary Units. to change.
C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MACOM [ Tyco Electronics ]
