NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Material Specifications
Contacts
MIL-M-14, Type CFG. The per-
Performance Data
formance characteristics of
these housings make them an
excellent choice
for applications in which
exceptional resistance to
acids, alkalies or solvents
is not of prime concern.
Polyester housings are
molded from a high tempera-
ture thermoplastic material
per ASTM D3220. Polyester
housings provide the high
temperature characteristics of
diallyl phthalate and phenolic,
but with a higher impact
strength.
Temperature Rating:
Phenolic Housings,
–55°C to +150°C
Diallyl Phthalate Housings, –65°C
to +125°C
Polyester, –55°C to +130°C
The material composition and
construction of AMP contacts
encompass varying price
ranges and performance char-
acteristics. Specific materials
and available platings and
plating thicknesses of each
contact type are provided on
individual contact pages in
the Contact section (pages
30 thru 43). A brief descrip-
tion of each contact type is
presented on pages 26
Flammability Ratings: UL94V-0
Dielectric Withstanding
Voltage (at sea level):
Type II Contacts, 1500 VAC, RMS
Type III+ Contacts, 900 VAC, RMS
Durability (Mating/Unmating):
Types II and III+ Contacts, Gold
Plated: 500 cycles;
Types II and III+ Contacts,
Tin Plated:
through 29. Also, typical per-
formance data of M Series
connectors and contacts is
shown below.
50 cycles; Type I Contacts,
Gold Plated: 100 cycles
Hardware
Housings
A variety of materials such as
plated steel, stainless steel
and aluminum, are used in
the construction of
M Series connector hardware.
This provides for the proper
operation and durability of
each hardware component,
while offering a choice of
economies to satisfy particu-
lar application requirements.
The materials of each hard-
ware component are
Note: For detailed information on the
above performance data and further
information on other performance data
such as Insulation Resistance, Thermal
Shock, Moisture Resistance, Vibration
and Physical Shock, request
M Series connector housings
are made of either diallyl
phthalate (blue), general pur-
pose phenolic (black)
AMP Product Specification No.
108-10001.
or polyester (black).
Diallyl phthalate housings are
molded of material per
MIL-M-14, Type SDG. These
housings are ideally suited for
use where adverse environ-
mental conditions are an
important factor. Their advan-
tages include exceptional
stability; excellent resistance
to acids, alkalies and solvents;
low moisture absorption; and
good dielectric strength.
specified on the individual
hardware component pages
in the Hardware section
(pages 78 through 89).
Phenolic housings are molded
of material per
•ꢀRecognized under the
Component Program of
Underwriters Laboratories
Inc. for 250 volts,
R
File No. E28476
•ꢀCertified by Canadian
Standards Association,
File No. LR 7189
6
Catalog 82003
Revised 06-08
Dimensions are in millimeters
and inches unless otherwise
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
specified. Values in brackets are
equivalent U.S. Customary Units.
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
