NOTE: All part numbers
are RoHS Compliant
AMP M Series
Pin and Socket Connectors
Introduction
AMP M Series connectors are contacts. A description of each
one of the most versatile and contact type is presented on
complete pin and socket con- pages 26 through 29.
nector lines available today.
Application tooling for these
contacts is described on pages
90 and 91.
From the basic molded plastic
housing, a connector can be
built up with a wide choice of Standard connectors
contacts and hardware to
Standard connectors are com-
serve in applications ranging
from sophisticated computers,
medical instrumentation and
military ground support
equipment to rugged truck
transmissions.
prised of unloaded housings
that accept a variety of crimp,
solder and posted contacts. All
standard connector housings
will accept pins and/or sockets,
permitting various combina-
tions of contact loading.
Standard connectors are
described on pages
How this M Series
catalog is divided
The M Series catalog is
divided into six categories:
•ꢀApplication section
•ꢀContacts/Tooling
•ꢀStandard Connector
Housings
•ꢀPosted Connector Housings
•ꢀSpecial Application
Connector Housings
•ꢀHardware
44 through 51.
Posted connectors
Posted connectors are
preloaded with post-type con-
tacts that accept
TERMI-POINT Clip or
wrap-type terminations.
All posted connectors are
described on pages 52 through
60.
Following is a brief summary
of each of the six categories.
Special Application connec-
tors
Knowing what you need
to meet your application
is made easy
Connectors for special applica-
tion are available in
the following configurations:
•ꢀV.35
Eight applications have been
illustrated with selection
charts from pages 10 through •ꢀHigh Current
25. These charts will assist you •ꢀMixed Contact Connectors
to select the appropriate con- •ꢀHigh Voltage
nector housing as well as the
necessary hardware. Each
base part number is listed in
the numerical index on pages
94, 95 in order to find com-
plete information about a
particular part.
•ꢀRFI/EMI Shielded
•ꢀGrounding Blocks
Special Application Connectors
are described on pages 61
through 77.
The right hardware for the
entire M Series connector line
Contacts of various types
provide different functions in
M Series connector housings
Hardware is available to provide
fastening, protection, shielding,
guiding, strain relief and keying
capabilities for the entire
Included are contacts for sig-
nal and power applications, for
coaxial cable and posted ver-
sions for backpanel wiring. A
full complement of application
tooling is available to meet
any production requirement
for terminating the crimp-type
contacts and wiring posted
M Series connector line.
Application charts for properly
selecting hardware are pre-
sented on pages 10 through 25.
Detailed information on hard-
ware is located on pages 78
through 89.
4
Catalog 82003
Revised 06-08
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
and inches unless otherwise
specified. Values in brackets are
equivalent U.S. Customary Units.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
