Specifications
ispLSI 8600V
Output Control Organization
In addition to the data input and output to the I/O cells,
each I/O cell can have up to six different I/O cell control
signals. In addition to the internal OE control, the five
control signals for each I/O cell consist of pin OE control,
clock enable, clock input, asynchronous preset and asyn-
chronous reset. All of the I/O control signals can be driven
either from the dedicated external input pins or from the
internal control bus.
The output enable of each I/O cell can be driven by 21
different sources – 16 from the output control bus, four
from the Global OE pins and one from the Test OE pin.
The Global OE signals and Test OE signal are driven
from the dedicated external control input pins.
The 16-bit wide output control buses are organized in four
different quadrants as shown in Figure 5. Since each
GLB is capable of generating the output control signals,
each of the output control bus signals can be driven from
a unique GLB. The 30 GLBs can generate a total of 30
unique I/O control signals. Referring to Figure 2, the GLB
generates its output control signal from control product
term (PT81).
Figure 5 also illustrates how the quadrant clocks are
routed to the appropriate quadrant I/O cells.
Figure 5. Output Control Bus and Quadrant Organization
Quadrant 0, 16-Bit Wide Output Control Bus
(I/O B0-B4 <0-11>, QIOCLK0)
Quadrant 1, 16-Bit Wide Output Control Bus
(I/O G0-G5 <12-23>, QIOCLK1)
GLB
Generated
Output
Control
(see Figure 2)
From PT81
Quadrant 2, 16-Bit Wide Output Control Bus
(I/O B0-B4 <12-23>, QIOCLK2)
OE Bus/8600V.eps
8
Quadrant 3, 16-Bit Wide Output Control Bus
(I/O G0-G5 <0-11>, QIOCLK3)
LATTICE [ LATTICE SEMICONDUCTOR ]
