38 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet
Performance Characteristics (Continued)
Waveform math
Number of math functions
Arithmetic
Four, displays all four simultaneously. Can be cascaded
Add, subtract, multiply, divide, differentiate, integrate, FFT, Ax + B, squared, square root, absolute
value, common logarithm, natural logarithm, exponential, base 10 exponential, low-pass filter,
high-pass filter, averaged value, magnify, max hold, min hold, measurement trend, chart logic bus
(timing or state), clock recovery
Enhanced FFT
Record size
Window types
Display
Up to 1-Mpts resolution via precision mode
Hanning, flat top, rectangular, Blackman-Harris, Bartlett
Color grade or monochrome
Waveforms
Peak search
FFT, max hold, min hold, average
Max 11 peaks, threshold and excursion control
Waveform analysis
Mask/limit test (Option)
Standard mask/limit test capability provides pass/fail comparison of a signal under test to a
predefined mask template or automask template. Predefined mask templates or edits to an automask
template can be made via a text editor. > 130,000 mask tests per second (waveform update rate)
Provides a statistical view of a waveform or a measurement
Any analog channels, math functions, reference waveforms, measurements
Horizontal, vertical, or measurement
Histogram
Source
Types
Measurements
Modes
Hits, peak, max, min, peak to peak, mean, median, mode, bin width, standard deviation, 1~3 sigma
All modes supported except zoom, ZY, and roll
Color grade
Provides a 3-dimensional view of waveform intensity
Source
Color themes
Modes
Any analog channels, math functions, reference waveforms, real-time eye
Temperature and intensity
All modes supported except zoom, ZY, and roll
Jitter (Option)
Measures the variance of a measurement over time
Jitter measurement
floor
600 fs rms at 6 GHz sine wave (typical)
Source
Clock recovery
Any analog channels, math functions, and reference waveforms
Constant frequency, first-order phase lock loop (PLL), second-order PLL, explicit
Data rate: Fully automatic, semi-automatic, manual
Real-time eye (Option)
Provides the color graded eye pattern analysis based on the recovered clock. Data bits are folded on
top of each other per clock cycle to give a 3-dimensional view
Any analog channels, math functions, and reference waveforms
Constant frequency, first-order phase lock loop (PLL), second-order PLL, explicit
Data rate: Fully automatic, semi-automatic, manual
Source
Clock recovery
Color mode
Color grade
Measurements
Eye height, eye width
Precision mode
Increase the analysis record length. Minimum: 100 kpts; maximum 1 Mpts
KEYSIGHT [ Keysight Technologies ]
