34 | Keysight | B1505A Power Device Analyzer/Curve Tracer - Data Sheet
N1259A-013 Curve Tracer test
adapter socket module
Furnished accessories
N1259A-030 1 kΩ resistor box
for gate
– Test lead (red), short, 2 ea.
– Test lead (black), short, 2 ea.
– Test lead (red), long, 4 ea.
– Test lead (black), long, 4 ea.
Specifications
Specifications
Number of terminals:
Sockets, 6 ea.
Input/output terminals:
Ø4 mm jack (banana), 1 ea.
Resistance: 1 kΩ ±10%
Maximum voltage: ±200 V
Maximum power: 1 W
(Ø4 mm jack (banana))
Test adapter interface:*
Sockets, 6 ea.
(Ø4 mm jack (banana))
Maximum voltage at terminals:
3000 V Vdc
Maximum current for terminals:
For Collector/Drain Force and
Emitter/Source Force
39 A (DC), 500 A (Pulse)
For others
N1259A-020 high voltage
bias-tee
Specifications
Input terminals:
Supplemental characteristics
DC bias input, 1 ea.
(Ø4 mm jack (banana))
MFCMU port, 1 ea.
Leakage current: 10 pA at 100 V
N1259A-035 Universal
resistor box
Hcur, Hpot, Lcur, Lpot, (BNC)
Guard input, 1ea (Ø4 mm banana
jack)
Specifications
1 A (DC), 20 A (Pulse)
Output terminal:
MFCMU port
Input/output terminals:
Ø4 mm banana jack, 1 ea.
Resistance: Installed by a user
Maximum voltage for terminals:
±3000 V
*A test adapter for Tektronix curve tracers
(370B/371B) can be connected to this
interface.
High (SHV)
Low (SHV)
External DC bias voltage: ±3000 V
Frequency:
10 kHz to 1 MHz (150 Ω at 10 kHz)
Series capacitance: 110 nF ±5%
Input resistance: 100 kΩ ±1%
N1259A-014 Gate Charge
Socket Adapter
N1259A-300 module
selector for test fixture
Purpose
To make gate charge measurements with
the N1259A.
Specifications
N1259A-021 1 MΩ
resistor box
Input terminals:
HPSMU port1, 1 ea.
Required Hardware
Force, sense (Triaxial)
HCSMU port, 1 ea.
– N1259A test fixture, 1 ea.
– N1259A-300 Module selector, 1 ea.
– B1512A HCSMU, 1 ea.
Specifications
Input/output terminals:
Ø4 mm jack (banana), 1 ea.
Resistance: 1 MΩ ±5%
Maximum voltage: ±3000 V
Power rating: 9 W
Force (BNC), sense (Triaxial)
HVSMU port2, 1 ea. (HV triaxial)
GNDU port, 1 ea. (Triaxial)
Digital I/O port, 1 ea. (D-sub 25 pin)
AC power line connector, 1 ea.
1. Either HPSMU or MPSMU can be connected
to HPSMU port.
– B1513B/C HVSMU, 1 ea.
– B1514A MCSMU, 2 ea.
Specifications
Supplemental characteristics
Number of terminals: Sockets, 8 ea.
(Ø4 mm jack (banana))
Leakage current: 10 pA at 100 V
2. Either HVSMU or HVMCU can be connected
to HVSMU port.
Maximum voltage at terminals:
For Gate DUT High: 30 V
For Gate DUT Low: 10 V
N1259A-022 100 kΩ
resistor box
For selector force High: 3000 V
For selector force Low: 10 V
For selector sense High: 3000 V
For selector sense Low: 10 V
For SMU control High: 30 V
For SMU control Low: 10 V
Maximum current for terminals:
For Gate DUT High:1 A
Specifications
Input/output terminals:
Ø4 mm jack (banana), 1 ea.
Resistance: 100 kΩ ±5%
Maximum voltage: ±3000 V
Power rating: 6.4 W
Supplemental characteristics
For Gate DUT Low: 1 A
Leakage current: 10 pA at 100 V
For selector force: 500 A
For selector sense: 20 mA
For SMU control: 1 A
KEYSIGHT [ Keysight Technologies ]
