37 | Keysight | B1505A Power Device Analyzer/Curve Tracer - Data Sheet
unexpected surge when connecting UHVU
to wafer prober.
N1265A-014 Gate Charge
Socket Adapter
N1265A-040 10 kV Ultra High
Voltage Gate
Protection Adapter
Specifications
Purpose
Input terminals:
To make gate charge measurements with
the N1265A.
Gate MCSMU Force, 1 ea (Triaxial)
Gate MCSMU Sense, 1 ea (Triaxial)
Chuck MCSMU Force, 1 ea (Triaxial)
Chuck MCSMU Sense, 1 ea
(Triaxial)
UHV Low, 1ea (HV triaxial)
Output terminals: 3ea (SHV)
Gate, Chuck, Source
Specifications
Input: 4 ea. (Ø4 mm plug (banana))
High (Force, Sense)
Required Hardware
– N1265A UHC expander, 1 ea.
– B1513B/C HVSMU, 1 ea.
– B1514A MCSMU, 2 ea.
Low (Force, Sense)
Output terminals: 2 ea. (Ø4 mm jack
(banana))
High, Low
Maximum voltage: ±200 V
Maximum surge voltage: ±10 kV
Maximum voltage: ±200 V
Maximum surge voltage: ±10 kV
Specifications
Number of terminals: Sockets, 8 ea.
(Ø4 mm jack (banana))
N1265A-041 Thermocouple,
Type K, 2 ea
N1271A Thermal test
enclosure
Maximum voltage at terminals:
For Gate DUT High: 30 V
For Gate DUT Low: 10 V
Feature
For selector force High: 3000 V
For selector force Low: 10 V
For selector sense High: 3000 V
For selector sense Low: 10 V
For SMU control High: 30 V
For SMU control Low: 10 V
Maximum current for terminals:
For Gate DUT High:1 A
N1265A-041 can be connected to Ther-
mocouple terminal inside the N1265A and
enables B1505A to
Operation Condition
Temperature: +5 °C to 30 °C
Humidity: 20% to 70% RH, Non-
condensing
read out temperature at the top
of the thermocouple.
Accuracy specifications degrade by a factor
of 3x versus measurements made without
the thermal enclosure.
Specifications
Connector: Type K plug
Length: 3000 mm
(Supplemental characteristics)
For Gate DUT Low: 1 A
For selector force: 500 A
For selector sense: 20 mA
For SMU control: 1 A
Common furnished accessories:
200 mm high current cable, 2 ea.
300 mm high current cable, 2 ea.
200 mm normal cable, 6 ea.
300 mm normal cable, 4 ea.
Banana pin adapter, 14 ea.
N1265A-045 Container for Pro-
tection Adapter and
Bias Tee
Furnished accessories
– Ultra high current banana test lead,
2 ea.
– Test lead (red), short, 2 ea.
– Test lead (black), short, 2 ea.
– Test lead (red), long, 2 ea.
– Test lead (black), long, 2 ea.
Feature
Mini alligator clip, 10 ea.
N1265A-045 can accommodate protection
adapters and bias tee which are used with
N1265A to make the measurement envi-
ronment clean and safe
Large clip, 4 ea.
N1271A-001 Thermal plate
compatible enclosure for
N1259A/N1265A
N1265A-035 Universal
R-Box for N1265A
Specifications
Dimension: 420 mm W x 193 mm
H x 565 mm D
Specifications
Weight: 15 kg
Maximum superimposed load: 50 kg
Purpose
Input: 4 ea. (Ø4 mm plug (banana))
High (Force, Sense)
Supports placement of the inTEST Thermal
Plate within the test fixtures (N1259A/
N1265A) to enable temperature depen-
dency measurements up to 250 °C.
Low (Force, Sense)
Output terminals: 2 ea. (Ø4 mm jack
(banana))
High, Low
Resistance: Installed by a user
Maximum voltage for terminals: ±200 V
N1269A Ultra High Voltage Con-
nection Adapter
The inTest thermal plate with GP-IB control
option is necessary for automated thermal
measurement.
Feature
To make the connection simple and to
protect measurement resources from