欢迎访问ic37.com |
会员登录 免费注册
发布采购

IC42S16160C-6TL 参数 Datasheet PDF下载

IC42S16160C-6TL图片预览
型号: IC42S16160C-6TL
PDF下载: 下载PDF文件 查看货源
内容描述: [Synchronous DRAM, 16MX16, 5.4ns, CMOS, PDSO54, 0.400 X 875 INCH, 0.80 MM PITCH, LEAD FREE, TSOP2-54]
分类和应用: 时钟动态存储器光电二极管内存集成电路
文件页数/大小: 40 页 / 1538 K
品牌: ISSI [ INTEGRATED SILICON SOLUTION, INC ]
 浏览型号IC42S16160C-6TL的Datasheet PDF文件第2页浏览型号IC42S16160C-6TL的Datasheet PDF文件第3页浏览型号IC42S16160C-6TL的Datasheet PDF文件第4页浏览型号IC42S16160C-6TL的Datasheet PDF文件第5页浏览型号IC42S16160C-6TL的Datasheet PDF文件第6页浏览型号IC42S16160C-6TL的Datasheet PDF文件第7页浏览型号IC42S16160C-6TL的Datasheet PDF文件第8页浏览型号IC42S16160C-6TL的Datasheet PDF文件第9页  
IS42S83200C
IS42S16160C
IC42S16160C
256 Mb Single Data Rate Synchronous DRAM
PRELIMINARY INFORMATION
JUNE
2008
IS42S83200C
is organized as 4-bank x 8,388,608-word x 8-bit Synchronous DRAM with LVTTL interface and
IS42S16160C and IC42S16160C
is organized as 4-bank x 4,194,304-word x 16-bit. All inputs and outputs are referenced to
the rising edge of
CLK.
IS42S83200C, IS42S16160C and IC42S16160C
achieve very high speed data rates up to 166MHz, and
are suitable for main
memories or graphic memories in computer systems.
General Description
- Single 3.3V ±0.3V power supply
- Max. Clock frequency :
- 6:166MHz<3-3-3>/-7:143MHz<3-3-3>/-75:133MHz<3-3-3>
- Fully synchronous operation referenced to clock rising edge
- 4-bank operation controlled by BA0,BA1(Bank Address)
- /CAS latency- 2/3 (programmable)
- Burst length- 1/2/4/8/FP (programmable)
- Burst type- Sequential and interleave burst (programmable)
- Byte Control- LDQM and UDQM (IS42S16160C, IC42S16160C)
- Random column access
- Auto precharge / All bank precharge controlled by A10
- Auto and self refresh
- 8192 refresh cycles /64ms
- LVTTL Interface
- Package
400-mil, 54-pin Thin Small Outline (TSOP II) with 0.8mm lead pitch
Pb-free package is available
Features
Copyright © 2006 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without
notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the lat-
est version of this device specification before relying on any published information and before placing orders for products.
Integrated Silicon Solution, Inc. — www.issi.com
Rev. 00D
05/29/08
1