Electrical Specifications
Table 2-10. V Static and Transient Tolerance
CC
ICC [A]
VCC_MAX [V]
VCC_TYP [V]
VCC_MIN [V]
Notes
0
5
VID - 0.000
VID - 0.006
VID - 0.013
VID - 0.019
VID - 0.025
VID - 0.031
VID - 0.038
VID - 0.044
VID - 0.050
VID - 0.056
VID - 0.063
VID - 0.069
VID - 0.075
VID - 0.081
VID - 0.087
VID - 0.094
VID - 0.100
VID - 0.106
VID - 0.113
VID - 0.119
VID - 0.125
VID - 0.020
VID - 0.026
VID - 0.033
VID - 0.039
VID - 0.045
VID - 0.051
VID - 0.058
VID - 0.064
VID - 0.070
VID - 0.076
VID - 0.083
VID - 0.089
VID - 0.095
VID - 0.101
VID - 0.108
VID - 0.114
VID - 0.120
VID - 0.126
VID - 0.133
VID - 0.139
VID - 0.145
VID - 0.040
VID - 0.046
VID - 0.053
VID - 0.059
VID - 0.065
VID - 0.071
VID - 0.078
VID - 0.084
VID - 0.090
VID - 0.096
VID - 0.103
VID - 0.109
VID - 0.115
VID - 0.121
VID - 0.128
VID - 0.134
VID - 0.140
VID - 0.146
VID - 0.153
VID - 0.159
VID - 0.165
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
1,2,3
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
NOTES:
1. The VCC_MIN and VCC_MAX load lines represent static and transient limits.
2. This table is intended to aid in reading discrete points on Figure 2-4.
3. The load lines specify voltage limits at the die measured at the VCCSENSE and VSSSENSE pins. Voltage
regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS pins.
64-bit Intel® Xeon™ Processor MP with up to 8MB L3 Cache Datasheet
31