Electrical Specifications
Figure 2-2. VCC Static and Transient Tolerance
Icc [A]
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
VID - 0.000
VID - 0.050
VID - 0.100
VID - 0.150
VID - 0.200
VID - 0.250
VID - 0.300
Vcc
Maximum
Vcc
Typical
Vcc
Minimum
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in
Section 2.12.
2. This loadline specification shows the deviation from the VID set point.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE pins. Voltage
regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS pins. Refer to
the Voltage Regulator-Down (VRD) 10.0 Design Guidelines for Desktop Socket 478 for socket loadline
guidelines and VR implementation details.
Datasheet
25