IA88C00
Data Sheet
Microcontroller
As of Production Version -01
Absolute Maximum Ratings
Symbol
VDO
TSTG
TA
Description
Supply Voltage*
Storage Temp
Min
-0.3
-65
†
Max
+7.0
+150
†
Unit
V
C
Oper Ambient Temp
C
* Voltages on all pins with respect to GND
† See Ordering Information
CAUTION
Stress that exceeds that presented above may cause permanent damage to the device. This is a stress
rating only. Acceptable operation of the device at any condition above that which is indicated in the
operational sections of these specifications is not implied. Exposure to absolute maximum rating
conditions for an extended period may affect device reliability.
Standard Test Conditions
The following characteristics apply to standard test conditions as noted. All voltages are referenced to
VSS. Positive current flows into the referenced pin (Standard Test Load).
Standard conditions are:
4.5V < VCC < 5.5V
GND – OV
-40ºC < TA < + 85ºC
+5V
1k
From Output
Under Test
150 pF
400 µA
Figure 63. Standard Test Load
Copyright 2005
Innovasic.com
Innovasic Semiconductor
ENG21 1 030617-04
Page 66 of 80
www.Innovasic
1.888.824.4184
INNOVASIC [ INNOVASIC, INC ]
