XMC1300
XMC1000 Family
Electrical Parameter
3) Valid for a 100 nF buffer capacitor connected to supply pin where current from capacitor is forwarded only to
the chip. A larger capacitor value has to be chosen if the power source sink a current.
4) This values does not include the ramp-up time. During startup firmware execution, MCLK is running at 32 MHz
and the clocks to peripheral as specified in register CGATSTAT0 are gated.
5.0V
VDDPPW
}
VDDP
VDDPBO
Figure 12
Supply Threshold Parameters
Data Sheet
44
V1.3, 2014-02
Subject to Agreement on the Use of Product Information