S29GL01GP
S29GL512P
S29GL256P
S29GL128P
1. Ordering Information
The ordering part number is formed by a valid combination of the following:
S29GL01GP
12
F
F
I
01
0
PACKING TYPE
0
2
3
= Tray (standard (Note 5))
= 7” Tape and Reel
= 13” Tape and Reel
MODEL NUMBER (VIO range, protection when WP# =VIL)
01 = VIO = VCC = 2.7 to 3.6 V, highest address sector protected
02 = VIO = VCC = 2.7 to 3.6 V, lowest address sector protected
V1= VIO = 1.65 to VCC, VCC = 2.7 to 3.6 V, highest address sector protected
V2= VIO = 1.65 to VCC, VCC = 2.7 to 3.6 V, lowest address sector protected
R1= VIO = VCC = 3.0 to 3.6 V, highest address sector protected
R2= VIO = VCC = 3.0 to 3.6 V, lowest address sector protected
TEMPERATURE RANGE
I
= Industrial (–40°C to +85°C)
C = Commercial (0°C to +85°C)
PACKAGE MATERIALS SET
A = Pb (Note 1)
F = Pb-free
PACKAGE TYPE
T = 56-pin Thin Small Outline Package (TSOP) Standard Pinout(TSO56)
F = 64-ball Fortified Ball Grid Array, 1.0 mm pitch package (LAA064)
SPEED OPTION
90 = 90 ns
10 = 100 ns
11 = 110 ns
12 = 120 ns
13 = 130 ns
DEVICE NUMBER/DESCRIPTION
S29GL01GP, S29GL512P, S29GL256P, S29GL128P
3.0 Volt-only, 1024, 512, 256 and 128 Megabit Page-Mode Flash Memory, manufactured on 90 nm MirrorBit® process
technology
Recommended Combinations
Recommended Combinations list configurations planned to be supported in volume for this device. Consult your local sales office to
confirm availability of specific recommended combinations and to check on newly released combinations.
Document Number: 002-00886 Rev. *B
Page 4 of 83
INFINEON [ Infineon ]
