Functional Description
CON
Connected to the S bus. Only available on PEB 2085.
CON = 0:
Disconnected from the S bus; an activation of the S/T line initiated by
the TE/LT-T is not possible: Info 1 cannot be transmitted. An activation
initiated by the network (reception of Info2/Info4) is still possible.
CON = 1:
Connected to the S bus; normal operation, transmission of Info 1
(upon an ARU command) is possible.
–
not used
X0 Mode Specific Pin (PEB 2086)
The X0 pin of the PEB 2085 ISAC-S which was intended for the CON-input (Connected to the
S-Bus) has been eliminated on PEB 2086. As a result, the C/I response DIS (Disconnect) will
not be generated.
Semiconductor Group
34