BTS7040-1EPA
PROFET™ +2 12V
General Product Characteristics
Table 3
Absolute Maximum Ratings1) (continued)
TJ = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Parameter
Symbol
Values
Typ.
Unit Note or
Test Condition
Number
Min.
Max.
ESD Susceptibility
ESD Susceptibility all Pins
(HBM)
VESD(HBM)
-2
–
–
–
–
2
kV
kV
V
HBM3)
P_4.1.0.21
P_4.1.0.22
P_4.1.0.23
P_4.1.0.24
ESD Susceptibility OUT vs GND VESD(HBM)_OU -4
and VS connected (HBM)
4
HBM3)
CDM4)
CDM4)
T
ESD Susceptibility all Pins
(CDM)
VESD(CDM)
-500
500
750
ESD Susceptibility Corner Pins VESD(CDM)_CR -750
V
(CDM)
N
(pins 1, 7, 8, 14)
1) Not subject to production test - specified by design.
2) Maximum VDI to be considered for Latch-Up tests: 5.5 V.
3) ESD susceptibility, Human Body Model “HBM”, according to AEC Q100-002.
4) ESD susceptibility, Charged Device Model “CDM”, according to AEC Q100-011.
Notes
1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
8
Rev. 1.10
2020-12-14
INFINEON [ Infineon ]
