BTS7040-1EPA
PROFET™ +2 12V
General Product Characteristics
Table 5
Functional Range - Supply Voltage and Temperature1) (continued)
Parameter
Symbol
Values
Unit Note or
Test Condition
Number
Min. Typ. Max.
3)
Upper Extended Supply
VS(EXT,UP)
18
–
28
V
P_4.3.0.3
Voltage Range for Operation
(parameter
deviations possible)
Junction Temperature
TJ
-40
–
150 °C
–
P_4.3.0.5
1) Not subject to production test - specified by design.
2) In case of VS voltage decreasing: VS(EXT,LOW),MIN = 3.1 V. In case of VS voltage increasing: VS(EXT,LOW),MIN = 4.1 V.
3) Protection functions still operative.
Note:
Within the functional or operating range, the IC operates as described in the circuit description. The
electrical characteristics are specified within the conditions given in the Electrical Characteristics
tables.
4.4
Thermal Resistance
Note:
This thermal data was generated in accordance with JEDEC JESD51 standards. For more
information, go to www.jedec.org.
Table 6
Thermal Resistance1)
Parameter
Symbol
Values
Typ.
3.3
Unit Note or
Test Condition
Number
Min.
Max.
2)
Thermal Characterization
Parameter Junction-Top
ΨJTOP
–
5.3
K/W
P_4.4.0.1
P_4.4.0.2
2)
Thermal Resistance
Junction-to-Case
RthJC
–
–
2.9
4.7
–
K/W
simulated at
exposed pad
2)
Thermal Resistance
Junction-to-Ambient
RthJA
34.5
K/W
P_4.4.0.3
1) Not subject to production test - specified by design.
2) According to Jedec JESD51-2,-5,-7 at natural convection on FR4 2s2p board; the Product (Chip + Package) was
simulated on a 76.2 × 114.3 × 1.5 mm board with 2 inner copper layers (2 × 70 µm Cu, 2 × 35 µm Cu). Where applicable
a thermal via array under the exposed pad contacted the first inner copper layer. Simulation done at TA = 105°C,
P
DISSIPATION = 1 W.
Data Sheet
10
Rev. 1.10
2020-12-14
INFINEON [ Infineon ]
