欢迎访问ic37.com |
会员登录 免费注册
发布采购

BTS7040-1EPA 参数 Datasheet PDF下载

BTS7040-1EPA图片预览
型号: BTS7040-1EPA
PDF下载: 下载PDF文件 查看货源
内容描述: [PROFET™+2 12V | Automotive Smart High-Side Switch]
分类和应用:
文件页数/大小: 61 页 / 1636 K
品牌: INFINEON [ Infineon ]
 浏览型号BTS7040-1EPA的Datasheet PDF文件第50页浏览型号BTS7040-1EPA的Datasheet PDF文件第51页浏览型号BTS7040-1EPA的Datasheet PDF文件第52页浏览型号BTS7040-1EPA的Datasheet PDF文件第53页浏览型号BTS7040-1EPA的Datasheet PDF文件第55页浏览型号BTS7040-1EPA的Datasheet PDF文件第56页浏览型号BTS7040-1EPA的Datasheet PDF文件第57页浏览型号BTS7040-1EPA的Datasheet PDF文件第58页  
BTS7040-1EPA  
PROFET™ +2 12V  
Application Information  
10.2  
External Components  
Table 23 Suggested Component values  
Reference  
Value  
Purpose  
RIN  
4.7 kΩ  
Protection of the microcontroller during Overvoltage and Reverse Polarity  
Necessary to switch OFF BTS7040-1EPA output during Loss of Ground  
RDEN  
RPD  
4.7 kΩ  
47 kΩ  
Protection of the microcontroller during Overvoltage and Reverse Polarity  
Necessary to switch OFF BTS7040-1EPA output during Loss of Ground  
Output polarization (pull-down)  
Ensures polarization of BTS7040-1EPA outputs to distinguish between  
Open Load and Short to VS in OFF Diagnosis  
ROL  
1.5 kΩ  
Output polarization (pull-up)  
Ensures polarization of BTS7040-1EPA output during Open Load in OFF  
diagnosis  
COUT  
T1  
10 nF  
Protection of BTS7040-1EPA output during ESD events and BCI  
Switch the battery voltage for Open Load in OFF diagnosis  
Filtering of voltage spikes on the battery line  
BC 807  
100 nF  
47 nF  
CVS  
CVSGND  
Buffer capacitor for fast transient  
See Table 5 (P_4.3.0.7) for the boundary conditions  
A placeholder on PCB layout is recommended  
DZ2  
33 V TVS Diode Transient Voltage Suppressor diode  
Protection during Overvoltage and in case of Loss of Battery while driving  
an inductive load  
CVS2  
Filtering / buffer capacitor located at VBAT connector  
SENSE resistor  
RSENSE  
RIS_PROT  
1.2 kΩ  
4.7 kΩ  
Protection during Overvoltage, Reverse Polarity, Loss of Ground  
Value to be tuned according to microcontroller specifications  
DZ1  
7 V Z-Diode  
Protection of microcontroller during Overvoltage  
RADC  
4.7 kΩ  
Protection of microcontroller ADC input during Overvoltage, Reverse  
Polarity, Loss of Ground  
Value to be tuned according to microcontroller specifications  
CSENSE  
RGND  
220 pF  
Sense signal filtering  
A time constant (RADC * CSENSE) longer than 1 µs is recommended  
47 Ω  
Protection in case of Overvoltage and Loss of Battery while driving  
inductive loads  
10.3  
Further Application Information  
Please contact us for information regarding the Pin FMEA  
For further information you may contact http://www.infineon.com/  
Data Sheet  
54  
Rev. 1.10  
2020-12-14  
 复制成功!