iC-MN 25-BIT NONIUS ENCODER
WITH 3-CH. SAMPLING 13-BIT Sin/D INTERPOLATION
Rev D1, Page 35/59
TRACK OFFSET CALIBRATION
SPO_N
SPO_S
Addr. 0x3B; bit 1:0
Depending on the track resolution the offset values of
the nonius and segment tracks (POV = Phase-Offset-
Value) must be justified to the left in the SPO_N and
SPO_S registers. These offsets are added to the con-
version result of each track prior to synchronization
and are instrumental in calibrating the track.
Addr. 0x3A; bit 7:0
Addr. 0x39; bit 7:5
Addr. 0x39; bit 4:0
Addr. 0x38; bit 7:0
0x0000
. . .
Track Offset
0x1FFF
datalength defined by UBL_x+SBL_x
Table 49: Track offsets for nonius and segment
MSB
POV_x
LSB
POV_x
SPO_x
register:
0
0
0
Note: For nonius synchronization (see MODE_ST) it is
important that the used tracks within the 2UBL_S+UBL_N
master track periods have a shared zero crossing
once. With SPO_S or SPO_N the segment and nonius
tracks can be shifted to the master track accordingly.
S: ADR 0x38, bit 0
N: ADR 0x39, bit 5
S: ADR 0x39, bit 4
N: ADR 0x3B, bit 1
Figure 14: SPO_x (x=S,N)
ICHAUS [ IC-HAUS GMBH ]
