Data Sheet
Preliminary
PowerPC® 750CXr RISC Microprocessor
4. Electrical and Thermal Characteristics
This section provides both AC and DC electrical specifications, and thermal characteristics for the PowerPC
750CXr.
4.1 DC Electrical Characteristics
The tables in this section describe the PowerPC 750CXr’s DC electrical characteristics. Table 4-1 provides
the absolute maximum ratings.
Table 4-1. Absolute Maximum Ratings
Characteristic
Core supply voltage
Symbol
VDD
Value (BVSEL = 0)
-0.3 to +2.0
Value (BVSEL = 1)
-0.3 to +2.00
-0.3 to +2.00
-0.3 to +2.75
-0.3 to +2.75
-55 to +150
Unit
V
PLL supply voltage
60x bus supply voltage
Input voltage
AVDD
OVDD
VIN
-0.3 to +2.0
V
-0.3 to +2.0
V
-0.3 to +2.0
V
Storage temperature range
Notes:
TSTG
-55 to +150
°C
1. Functional and tested operating conditions are given in Table 4-2 on page 15. Absolute maximum ratings are stress ratings only, and functional opera-
tion at the maximums is not guaranteed. Stresses beyond those listed above may affect device reliability or cause permanent damage to the device.
2. Caution: VIN must not exceed OVDD by more than 0.6V at any time, including during power-on reset. This is a DC specification only. VIN overshoot tran-
sients up to OVDD+0.8v,and undershoots down to GND-0.8v (both measured with the 750CXr in the circuit) are allowed for up to 5ns or 1/3 bus clock
cycle, whichever is less.
3. Caution: OVDD must not exceed VDD/AVDD by more than 2.0V, except for up to 20ms during power on/off reset.
4. Caution: VDD/AVDD must not exceed OVDD by more than 1.2V, except for up to 20ms during power up/down.
5. Caution: AVDD must not exceed VDD by more than 1.2V, except for up to 20ms during power up/down reset.
Table 4-2 provides the recommended operating conditions for the PowerPC 750CXr.
Table 4-2. Recommended Operating Conditions
1
Characteristic
Symbol
VDD
Value
Unit
V
Core supply voltage < 500MHz
+1.8 to +1.9
+1.85 to +1.95
+1.8 to +1.95
+1.8 to +1.9
+2.375 to +2.625
GND to OVDD
0 to +95
Core supply voltage @ 500 MHz and 533 MHz
PLL supply voltage
VDD
V
AVDD
OVDD
OVDD
VIN
V
60x bus supply voltage (1.8V mode)
60x bus supply voltage (2.5V mode)
Input voltage
V
V
V
Die-junction temperature (Grade 4)
TJ
°C
Note: These are recommended and tested operating conditions. Proper device operation outside of these conditions is not guaranteed.
1. See performance sort in Section 1.3 on Page 11.
750cxr_DD4.0_Dev_gen_4_mkt.fm
February 28, 2005
Electrical and Thermal Characteristics
Page 15 of 43