Discontinued (9/98 - last order; 3/99 - last ship)
IBM11M1730BB1M x 72 E10/10, 3.3V, Au.
IBM11M2735H
IBM11M2735HB
2M x 72 DRAM MODULE
Features
• 168 Pin JEDEC Standard, 8 Byte Dual In-line
Memory Module
• 2Mx72 Fast Page Mode DIMM
• Performance:
-60
t
RAC
t
CAC
t
AA
t
RC
t
HPC
RAS Access Time
CAS Access Time
Access Time From Address
Cycle Time
EDO Page Mode Cycle Time
60ns
20ns
35ns
104ns
25ns
-70
70ns
25ns
40ns
124ns
30ns
• Au contacts
• Optimized for ECC applications
• System Performance Benefits:
- Buffered inputs (except RAS, Data)
- Reduced noise (32 V
SS
/V
CC
pins)
- Buffered PDs
• Extended Data Out (EDO) Mode, Read-Modify-
Write Cycles
• Refresh Modes: RAS-Only, CBR and Hidden
Refresh
• 2048 refresh cycles distributed across 32ms
• 11/10 addressing (Row/Column)
• Card size: 5.25" x 1.0" x 0.157"
• DRAMS in TSOP Package
• All inputs and outputs are LVTTL (3.3V) or TTL
(5.0V) compatible
• Single 3.3V
±
0.3V or 5.0V
±
0.5V Power Supply
Description
IBM11M2735H is an industry standard 168-pin
8-byte Dual In-line Memory Module (DIMM) which is
organized as a 2Mx72 high speed memory array
designed with EDO DRAMs for ECC applications.
The DIMM uses 9 2Mx8 DRAMs in TSOP packages.
The use of EDO DRAMs allows for a reduction in
Page Mode Cycle time from 40ns (Fast Page) to
25ns for 60ns DRAM modules.
Improved system performance is provided by the
on-DIMM buffering of selected input signals. The
specified timings include all buffer, net and skew
delays, which simplifies the memory subsystem
design analysis. The data and
RAS
signals are not
buffered, which preserves the DRAM access specifi-
cations of 60ns and 70ns.
Presence Detect (PD) and Identification Detect (ID)
bits provide information about the DIMM density,
addressing, performance and features. PD bits can
be dotted at the system level and activated for each
DIMM position using the PD enable (PDE) signal. ID
bits also allow detection of card features, and may
be dot-or’d at the system level to provide information
for the entire DIMM bank. For example, the system
will determine that ECC DIMMs are installed if PD8
is low (0). ID0 need not be sensed since both x72
and x80 ECC DIMMs will function in a x72 bank.
All IBM 168-pin DIMMs provide a high performance,
flexible 8-byte interface in a 5.25” long space-saving
footprint. Related products are the x64 and x72 par-
ity (5V) DIMMs and ECC DIMMs (5V and 3.3V).
Card Outline 3.3V
(Front)
(Back)
1
85
10 11
94 95
40 41
124 125
See Detail A
for 5.0V Version
84
168
Detail A
50H4199
SA14-4615-02
Revised 5/96
©IBM Corporation. All rights reserved.
Use is further subject to the provisions at the end of this document.
Page 1 of 29