HMC1190LP6GE
v01.1112
BROADBAND HIGH IP3 DUAL CHANNEL DOWNCONVERTER
w/ Fractional-N PLL & VCO, 0.7 - 3.5 GHz
Evaluation PCB
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the
ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC1190LP6GE from the
“Search by Part Number” pull down menu to view the product splash page.
Evaluation Order Information
Item
Contents
Part Number
Evaluation PCB Only
HMC1190LP6GE Evaluation PCB
EVAL01-HMC1190LP6G
HMC1190LP6GE Evaluation PCB
USB Interface Board
Evaluation Kit
6’ USB A Male to USB B Female Cable
CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software,
Hittite PLL Design Software)
EKIT01-HMC1190LP6G
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
22
HITTITE [ HITTITE MICROWAVE CORPORATION ]
