HMC382LP3
/
382LP3E
v01.0610
GaAs PHEMT MMIC
LOW NOISE AMPLIFIER, 1.7 - 2.2 GHz
Evaluation PCB
7
AMPLIFIERS - LOW NOISE - SMT
List of Materials for Evaluation PCB 112582
[1]
Item
J1 - J2
J3 - J5
C1
C2, C3
C4, C5
L1
L2
R1
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
DC Pin
10 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
15000 pF Capacitor, 0603 Pkg.
56nH Inductor, 0603 Pkg.
18nH Inductor, 0603 Pkg.
Resistor, 0402 Pkg.
HMC382LP3 / HMC382LP3E Amplifier
112580 Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed ground paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7-6