GL811E USB 2.0 to ATA/ATAPI Bridge Controller
Notes:
1. The host may assert STOP to request termination of the Ultra DMA burst no sooner than tRP after
HDMARDY_ is negated.
2. If the tSR timing is not satisfied, the host may receive zero, one, or two more data words from the device.
Figure 6.7 - Host Pausing an Ultra DMA Data-In Burst
Notes:
The definitions for the DIOW_:STOP, DIOR_:HDMARDY_:HSTROBE and
IORDY:DDMARDY_:DSTROBE signal lines are no longer in effect after DMARQ and DMACK are
negated.
Figure 6.8 - Device Terminating an Ultra DMA Data-In Burst
©2000-2006 Genesys Logic Inc. - All rights reserved.
Page 25
GENESYS [ GENESYS LOGIC ]
