GL811E USB 2.0 to ATA/ATAPI Bridge Controller
Note:
1. To terminate the transmission of a data burst, the Host shall negate DMACK_ within the specified time
after a DIOR_ or DIOW_ pulse. No further DIOR_ or DIOW_ pulses shall be asserted for this burst.
2. If the device is able to continue the transfer of data, the device may leave DMARQ asserted and wait
for the host to reassert DMACK_ or may negate DMARQ at any time after detecting that DMACK_
has been negated.
Figure 6.4 - Host terminating a Multiword DMA Data Burst
©2000-2006 Genesys Logic Inc. - All rights reserved.
Page 22
GENESYS [ GENESYS LOGIC ]
