MBM29LV160TE/BE-70/90/12
■ ABSOLUTE MAXIMUM RATINGS
Rating
Parameter
Symbol
Unit
Min.
–55
–40
Max.
+125
+85
Storage Temperature
Tstg
TA
°C
°C
Ambient Temperature with Power Applied
Voltage with Respect to Ground All pins except
A9, OE, RESET (Note 1)
VIN, VOUT
VCC
–0.5
–0.5
–0.5
VCC+0.5
+5.5
V
V
V
Power Supply Voltage (Note 1)
A9, OE, and RESET
(Note 2)
VIN
+13.0
Notes: 1. Minimum DC voltage on input or l/O pins are –0.5 V. During voltage transitions, inputs may negative
overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and l/O pins are VCC
+0.5 V. During voltage transitions,outputs may positive overshoot to VCC +2.0 V for periods of up to 20 ns.
2. Minimum DC input voltage on A9, OE, and RESET pins are –0.5 V. During voltage transitions, A9, OE,
and RESET pins may negative overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC input
voltage on A9, OE, and RESET pins are +13.0 V which may positive overshoot to 14.0 V for periods of
up to 20 ns. Voltage difference between input voltage and supply voltage (VIN – VCC) do not exceed 9 V.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Value
Parameter
Symbol
TA
Unit
Min.
–20
Typ.
Max.
+70
(-70)
°C
°C
V
Ambient Temperature
(-90/12)
(-70)
–40
+85
+3.0
+2.7
+3.6
+3.6
Power Supply Voltage
VCC
(-90/12)
V
Operating ranges define those limits between which the functionality of the device is quaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
27
FUJITSU [ FUJITSU ]
