7.2 Status Register – Index 02h
Power-on default [7:0] =0000_000xb
Bit
7-4
3
Name
Reserved
R/W
RO
PWR
Description
VSB3V
POWR_DOWN
FUNC_SEL
RO
VSB3V If this bit is set to 1, it mean the chip is in power down mode
VSB3V VID and GPIO function select. This is dedicated pin. if input value is
1(external pull-down 10K), the function is selected to VID. Otherwise, the
input value is 0, the function is selected to GPIO.
2
RO
1
0
I2C_ADDR
RO
VSB3V GPIO serial bus address Select. Internal pull-down 100K ohms are address
0x9C. If external is pull-up 10K ohms, the address is 0x6E. This pin is
trapped during the VSB3VOK.
STS_SLOTOCC
R/W
VBAT
Indicate the SLOTOCC# pin value. This pin will be latched till write this bit
to 1. Writing 0 is invalid.
7.3 Configuration and function select Register – Index 03h
Power-on default [7:0] =0000_0000b
Bit
Name
Reserved
R/W
RO
PWR
Description
7
VSB3V
6
IRQ_LEVEL
R/W
VSB3V Select IRQ Polarity (Level). Set to 1, IRQ is low active and SMI# is high
active. Default, the IRQ is high active and SMI# is low active.
5
IRQ_MODE
R/W
R/W
VSB3V IRQ/SMI# mode select. 0 – Level mode (IRQ mode), 1 – Pulse Mode
(SMI# mode). If pulse mode is selected, the active pulse is over 100us.
4-3
PIN12_MODE
VSB3V 00: GPIO12
01: LED12 IN this mode can use REG 0x06(bit5,4) to select LED
frequency.
10: IRQ
11: RSTOUT1#:
2
PIN11_MODE
PIN10_MODE
R/W
R/W
VSB3V 0: GPIO11
1: LED11 IN this mode can use REG 0x06(bit3,2) to select LED
frequency.
1-0
VSB3V 00: GPIO10
01: LED10 IN this mode can use REG 0x06(bit1,0) to select LED
frequency.
- 11 -
July, 2007
V0.24P
FINTEK [ FEATURE INTEGRATION TECHNOLOGY INC. ]
