F71869A
0: Index 0xAF is GPIO5 event enable register.
3
EVENT_EN_SEL R/W
0
1: Index 0xAF is GPIO3 event enable register.
Make code select. Select which make code to be accessed.
000: GPIO50 make code.
001: GPIO51 make code.
010: GPIO52 make code.
011: GPIO53 make code.
100: GPIO54 make code.
MAKE_CODE_SE
2-0
R/W
L
000
101: GPIO35 make code.
110: GPIO36 make code.
111: GPIO37 make code.
This changes the content of GP_MAKE_CODE register (CRAB).
6.8.37 GPIO5 KBC Make Code Register ⎯ Index ABh
Bit Name R/W Default
Description
This byte is the make code for GPIO5 KBC emulation. The break
code will be GP_MAKE_CODE + 0x80.
7-0 GP_MAKE_CODE R/W
00h
6.8.38 GPIO5 KBC Prefix Code Register ⎯ Index ACh
Bit Name R/W Default
Description
This byte is the prefix code for GPIO5 KBC emulation if
PRE_CODE_EN is set.
7-0 GP_PRE_CODE R/W
E0h
6.8.39 GPIO5 KBC Emulation Status Register 1⎯ Index ADh
Bit
Name
R/W Default
Description
Break code status of GPIO37. It will be set if GPIO37 is released
(rising edge). Write “1” to clear this bit.
7
GP37_BRK_STS R/W
GP36_BRK_STS R/W
GP35_BRK_STS R/W
GP54_BRK_STS R/W
GP53_BRK_STS R/W
GP52_BRK_STS R/W
GP51_BRK_STS R/W
GP50_BRK_STS R/W
0
0
0
0
0
0
0
0
Break code status of GPIO36. It will be set if GPIO36 is released
(rising edge). Write “1” to clear this bit.
6
5
4
3
2
1
0
Break code status of GPIO35. It will be set if GPIO35 is released
(rising edge). Write “1” to clear this bit.
Break code status of GPIO54. It will be set if GPIO54 is released
(rising edge). Write “1” to clear this bit.
Break code status of GPIO53. It will be set if GPIO53 is released
(rising edge). Write “1” to clear this bit.
Break code status of GPIO52. It will be set if GPIO52 is released
(rising edge). Write “1” to clear this bit.
Break code status of GPIO51. It will be set if GPIO51 is released
(rising edge). Write “1” to clear this bit.
Break code status of GPIO50. It will be set if GPIO50 is released
(rising edge). Write “1” to clear this bit.
6.8.40 GPIO5 KBC Emulation Status Register 2⎯ Index AEh
Bit
Name
R/W Default
Description
Make code status of GPIO37. It will be set if GPIO37 is pressed
(falling edge). Write “1” to clear this bit.
7
GP37_MAKE_STS R/W
0
125
Oct., 2011
V0.19P