欢迎访问ic37.com |
会员登录 免费注册
发布采购

EM78P5841NP 参数 Datasheet PDF下载

EM78P5841NP图片预览
型号: EM78P5841NP
PDF下载: 下载PDF文件 查看货源
内容描述: 8位微控制器 [8-Bit Microcontrollers]
分类和应用: 微控制器
文件页数/大小: 68 页 / 808 K
品牌: ELAN [ ELAN MICROELECTRONICS CORP ]
 浏览型号EM78P5841NP的Datasheet PDF文件第24页浏览型号EM78P5841NP的Datasheet PDF文件第25页浏览型号EM78P5841NP的Datasheet PDF文件第26页浏览型号EM78P5841NP的Datasheet PDF文件第27页浏览型号EM78P5841NP的Datasheet PDF文件第29页浏览型号EM78P5841NP的Datasheet PDF文件第30页浏览型号EM78P5841NP的Datasheet PDF文件第31页浏览型号EM78P5841NP的Datasheet PDF文件第32页  
EM78P5840N/41N/42N  
8-Bit Microcontrollers  
7.3.4 IOC7 (Port 7 I/O Control, Port 7 Pull-high Control)  
„ Page 0 (Port 7 I/O Control Register)  
Bit 7  
Bit 6  
IOC76  
R/W-1  
Bit 5  
IOC75  
R/W-1  
Bit 4  
IOC74  
R/W-1  
Bit 3  
IOC73  
R/W-1  
Bit 2  
Bit 1  
Bit 0  
IOC70  
R/W-1  
0
-
0
-
0
-
Bit 0 (IOC70): Port 70 pin is defined as general purpose IO, PLLC, or OSC through  
code option setting. In IRC mode or Crystal mode (only at code option  
P70S =0 ), Port 70 pin is a general purpose IO, while IOC70 is I/O  
direction control register of Port 70 pin.  
"0" : Set the corresponding I/O pin as output  
"1" : Set the corresponding I/O pin to high impedance  
Bit 1 (undefined): This bit is not used. However, by setting P71S = 1 through code  
option, Port 71 pin will become an input-only pin.  
Bit 2 (undefined): This bit is not used but must be cleared to “0.” Otherwise, the MCU  
power consumption will increase.  
NOTE  
The default value of this bit is “1.” Clear to “0” when initializing the MCU.  
Bit 3 ~ Bit6 (IOC73~IOC76): Port 7 I/O direction control register  
"0" : Set the corresponding I/O pin as output  
"1" : Set the corresponding I/O pin to high impedance  
Bit 7 (undefined): This bit is not used but must be cleared to “0.” Otherwise, the MCU  
power consumption will increase.  
NOTE  
The default value of this bit is “1.” Clear to “0” when initializing the MCU.  
„ Page 1 (Port 7 Pull-high Control Register)  
Bit 7  
Bit 6  
Bit 5  
Bit 4  
Bit 3  
Bit 2  
Bit 1  
Bit 0  
0
-
PH76  
PH75  
PH74  
PH73  
0
-
0
-
PH70  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
Bit 0 (PH70): Port 70 pull high control register. This bit only exists whe you set Port 70  
as a general purpose IO.  
"0" : disable pull high function  
"1" : enable pull high function  
Bits 1 ~ 2 & Bit 7 (undefined): These bits are not used but must be cleared to “0.”  
Otherwise, the MCU power consumption will increase.  
Bit 3 ~ Bit 6 (PH73 ~ PH76): Port 7 pull high control register  
"0" : disable pull high function  
"1" : enable pull high function  
22 •  
Product Specification (V1.0) 04.25.2006  
(This specification is subject to change without further notice)  
 复制成功!