EM78P259N/260N
8-Bit Microprocessor with OTP ROM
Bit 4 (TCCBTE): TCCB signal edge
0 = increment if the transition from low to high takes place on the
TCCB pin
1 = increment if the transition from high to low takes place on the
TCCB pin
Bit 3:
Not used.
Bit 2 (TCCCEN): TCCC enable bit
0 = disable TCCC
1 = enable TCCC as a counter
Bit 1 (TCCCTS) TCCC signal source
0 = internal instruction cycle clock. P63 is a bi-directional I/O pin.
1 = transit through the TCCC pin
Bit 0 (TCCCTE): TCCC signal edge
0 = increment if the transition from low to high takes place on the
TCCC pin
1 = increment if the transition from high to low takes place on the
TCCC pin
6.2.6 IOCA0 (IR and TCCC Scale Control Register)
7
6
5
4
3
2
1
0
TCCCSE TCCCS2 TCCCS1 TCCCS0
IRE
HF
LGP
IROUTE
Bit 7 (TCCCSE): Scale enable bit for TCCC
An 8-bit counter is provided as scale for TCCC and IR-Mode. When
in IR-Mode, TCCC counter scale uses the low-time segments of the
pulse generated by Fcarrier frequency modulation (see Fig. 6-11 in
Section 6.8.2, Function Description).
0 = scale disable bit, TCCC rate is 1:1
1 = scale enable bit, TCCC rate is set as Bit 6 ~ Bit 4
Product Specification (V1.0) 06.16.2005
• 19
(This specification is subject to change without further notice)
ELAN [ ELAN MICROELECTRONICS CORP ]
