欢迎访问ic37.com |
会员登录 免费注册
发布采购

DM9016 参数 Datasheet PDF下载

DM9016图片预览
型号: DM9016
PDF下载: 下载PDF文件 查看货源
内容描述: 10/100 Mbps的3端口以太网交换机控制器与通用处理器接口 [10/100 Mbps 3-port Ethernet Switch Controller with General Processor Interface]
分类和应用: 控制器以太网局域网(LAN)标准
文件页数/大小: 85 页 / 508 K
品牌: DAVICOM [ DAVICOM SEMICONDUCTOR, INC. ]
 浏览型号DM9016的Datasheet PDF文件第31页浏览型号DM9016的Datasheet PDF文件第32页浏览型号DM9016的Datasheet PDF文件第33页浏览型号DM9016的Datasheet PDF文件第34页浏览型号DM9016的Datasheet PDF文件第36页浏览型号DM9016的Datasheet PDF文件第37页浏览型号DM9016的Datasheet PDF文件第38页浏览型号DM9016的Datasheet PDF文件第39页  
DM9016  
3-port switch with Processor Interface  
6.53 Per Port Block Unknown ports Control Register (6BH)  
Bit  
7:4  
3:0  
Name  
RESERVED PH0,RW Reserved  
BLK_UKP PH0,RW Ports of unknown packet be blocked  
Default  
Description  
6.54 Per Port Security & STP Register (6CH)  
Bit  
7:6  
5:4  
Name  
RESERVED  
STPS  
Default  
0,RO  
Description  
Reserved  
PH0,RW Spanning Tree Port State  
There are 4 port state for supporting Spanning Tree Protocol  
00: Forwarding State, The port transmits and receives packets normally &  
learning is enabled.  
01: Disabled State, The port will not transmit and receive any packets & learning  
is disabled.  
10: Learning State, The port will only forward the packets that are to and from  
uP port (span packets) & leaning is enabled.  
11: Blocking/Listening State, The port will only forward the packets that are to  
and from uP port (span packets) & leaning is disabled.  
Reserved  
3
2
RESERVED  
PS_UNK  
0,RO  
PH0,RW Unknown source address handling when port security is enabled  
0: Discard unknown source address (Default)  
1: Forward unknown source address to uP Port  
PH0,RW Port Security Enable  
00: Port Security Disable (Default)  
01: First Lock  
1:0  
PS_EN  
10: First Link Lock  
11: Assign Lock  
6.55 Per Port Priority Queue Control Register (6DH)  
Bit  
7
6
Name  
TAG_OUT  
PRI_DIS  
WFQUE  
Default  
Description  
PHE0,RW Output Packet Tagging Enable  
PHE0,RW Priority Queue Disable  
PHE0,RW 8:4:2:1  
5
0: queue 3 > 2 > 1 > 0, means queue 3 always high priority  
1: 8:4:2:1, means queue 3 has weighting 8, queue 2 has weighting 4,  
etc  
4
3
2
TOS_PRI  
TOS_OFF  
PRI_OFF  
P_PRI  
PHE0,RW Priority ToS over VLAN  
PHE0,RW ToS Priority Classification Disable  
PHE0,RW 802.1 p Priority Classification Disable  
PHE0,RW Port Base priority  
00= queue 0  
1:0  
01=queue 1  
10=queue 2  
11=queue 3  
Preliminarydatasheet  
DM9016-13-DS-P01  
March 26, 2009  
35  
 复制成功!